Long Endurance Aerial Platform Tethered Drone Station High Altitude Use for Surveillance

• Customization: Available
• Ground Module Input Voltage: 190V to 240V
• Ground Module Output Voltage: 600~800V
• Model NO.: TPS110M-3000W
• Ground Module Output Power: Greater Than or Equal to 3500W
• Ground Module Protection Level: Ipx4
• Cable Length: 110m/220m
• Air Module Input Voltage: 580~810V
• Air Module Output Voltage: 50 ± 0.5VDC or 25 ± 0.3VDC
• Air Module Output Power: 3000W
• Air Module Protection Level: IP54
• Gross Weight: 44kg
• Transport Package: Aviation Hard Case
• Specification: 670× 600× 550mm
• Trademark: Rosefinch
• Origin: Nanjing, China
• HS Code: 8504401990
• Production Capacity: 500/Year

Product Description

Long Endurance Aerial Platform Tethered Drone Station High Altitude Use for Surveillance

In today's world where surveillance demands keep rising, we bring forth an innovative solution - our Long Endurance Aerial Platform Tethered Drone Station. This advanced system uses high - altitude tethered drones to provide constant surveillance, revolutionizing the way we monitor vast areas.

Video Demonstration

Product Description

Typical characteristics

1). Small size, light weight. It is easy to carry. Rapid deployment.

2). Simple operations, the entire process of drone taking off and landing does not require the operation of ground module.

3). Comprehensive input /output protection,fault elimination and self recover. 

4). Fully automatic take up and pay off function, the wire can be rewound once ground power cut off.

5). The air module power supply has a constant voltage output, and the back up battery has no charging and discharging phenomenon.

Functional characteristics

1). Protection function: Separate design for strong and weak electricity. Input over-voltage, input under-voltage. Output over voltage ,output over current, output circuit, output over temperature protection, input and output voltage resistance≥3000VDC, tethered cable insulation voltage esistance≥3500VDC.
2). Data communication: Wired and wireless communication function. Support remote display and control, client-side data viewing and downloading.Optional fiber optic communication.
3). Data display function: The touch screen displays data such as output voltage, output current,output power, cable outlet length, working duration, installation temperature, total power consumption, fault record, and working status information.

4). Set and adjustment: The display screen supports setting and adjustment the parameters such as reel in/out tension and speed, date and time, output voltage, safety lengths, warning temperature, etc., and support Chinese and English.
5). Alerts and reminds: When the system malfunctions, the display screen scrolls to display fault information, and the buzzer strong sound reminder.
6). Automatic take-up and payoff: Following take off and landing of the drone to synchronously tethered cable automated winch reel in/out, adjusting the tension auto management, and backup battery to activate cable reel in function in case of power cut off.
7). Carry and transport: The ground module is equipped with a handle and foot pads. folding trailer and trolley wheels is optional for transportation.
8). Power supply 5800W/7000Wh outdoor mobile power bank or 4300W/6L gasoline inverter generator is recommended.

Adapt to drones

1). Supporting flight altitude: ≥100m/200m (tethered cable length 110m/220m, reserve safe length.)

2). Supporting takeoff weight: 10~15kg (UAV force effect varies, this data is for reference only.)

3). Supporting flight duration: ≥24h (The system can support working hours depending on the structure of the UAV and the electrical fatigue resistance.)

Product Paramenters

Ambient temperature	-20~45 ℃ (working), -40~65 ℃ (storage)
Relative humidity	10-80% RH (working), 5-90% RH (storage)
Altitude	≤ 3000m
Ground power module
Input voltage	190-240Vac wide range input, single-phase 220Vac@50/60Hz
Output voltage	600~800Vdc adjustable, factory default 700Vdc
Output power	≥3500W (Rated Long-Time Output),≥4000W (peak value ≤ 30s)
Interface	Input aerial plug, cable output XT60 connector, fiber optic FC port (optional)
Size	450 × 360 × 280 ± 0.5mm, excluding foot pads and external accessories
Weight	17.5±0.5kg, excluding tethered cable
Tether cable
Fiber optic (optional)	The tethered cable is an optoelectronic composite cable containing tightly wrapped single-mode fiber with optional fiber optic communication.
Current	5-7A
DC resistance	6.8±0.2Ω, 100m@20℃loop
Cable length	standard equipment 110m, optional 220m;Fiber optic with FC connector (optional).
Outer diameter	3.4±0.1mm
Weight	11±1g/m

Air module
Input voltage	580~810Vdc wide range input
Output voltage	50 ± 0.5Vdc or 25 ± 0.3Vdc, constant voltage output, supporting voltage customization
Output power	3000W (rated long-term output), 3500W (peak value ≤ 10s)
Interface	Input XT60, output XT90*2
Size	165 × 93 × 48 ± 0.5mm, excluding mounting lugs
Weight	910 ± 10g, without external connectors

Details Images

Product Packaging

Company Profile

The "Drone Tethered Power System" - Rosefinch Technology is the leading manufacturer of drone tethering power station. 
Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system. The system is compatible for all multi rotor drones with MTOW 3-110kg.

We have always adhered to independent research and development of core technologies. The air module adopts a output voltage stabilizing circuit scheme, with a wide range of input and constant voltage output, which is different from the commonly used Vicor power supply unstable voltage scheme on the market.

Applications

The tethered UAV can be applied in situations and environments that require long-time operation, making up for the shortcomings of short endurance time, faster power consumption with more mounts, and the need for frequent battery replacement. It expands the industry application of UAV.

FAQ

Q1: Do you support OEM/ODM?
A1: Yes. We can print your logo on the product.
Q2: About samples.
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
Q3: What is the delivery time?
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity?
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost?
A5: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.

 If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.

.