Customization: | Available |
---|---|
Ground Module Input Voltage: | 190V to 240V |
Ground Module Onput Voltage: | 600~800V |
Still deciding? Get samples of US$ 41589/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The Professional Grade Tethered Drone System for the DJI FlyCart30 is an advanced solution designed for continuous aerial operations. The Drone Tethered Station for DJI FlyCart30 ensures reliable power supply and data transmission, enabling extended flight times without battery limitations. This station supports real-time data streaming, making it ideal for surveillance, inspection, and mapping applications where constant presence is crucial. With the Drone Tethered Station for DJI FlyCart30, users can leverage the drone's capabilities for longer periods, enhancing operational efficiency and effectiveness. Moreover, the Drone Tethered Station for DJI FlyCart30 is engineered to withstand various environmental conditions, ensuring stable performance in challenging scenarios.
items | Technical parameters | ||
Model | TPS220M-FC30 | TPS330M-FC30 | |
Cable length | 220M | 330M | |
Environmental temperature | -20~45ºC(working),-40~65ºC(storage) | ||
Relative humidity | 10~80%RH(working),5~90%RH(storage) | ||
Altitude | ≤3000m | ||
Ground power module | Input voltage | 380±10%VAC,three-phase, five-wire system (TCM),frequency 50Hz | |
Output voltage | 600~800Vdcadjustable,Factory Default 800Vdc | ||
Output power | ≥22000W(Rated Long-Time Output),≥25000W(peak value≮30s) | ||
take-up and payoff speed | 0~3m/s,adjustable | ||
take-up and payoff tensile | 0~20N,adjustable | ||
interface | Input air plug, bollard output LP20 air plug, fiber optic FC port (optional) | ||
Button and switch | AC Switches, high voltage on/off buttons, cable take-up buttons, power backup switches | ||
Protection level | IPx4 | ||
Size | 600×570×460±0.5mm,excluding foot pads and external accessories | ||
Weight | 54±0.5kg,excluding tethered cable | ||
Tethered cable | Material | Alloy lightweight high temperature resistant aircraft wire, composite fluoroplastic insulation, high modulus tensile aerospace grade fiber braid | |
Fiber optic communication | The tethered cable is an optoelectronic composite cable containing tightly wrapped single-mode fiber with optional fiber optic communication. | ||
Current | 25~30A | ||
DC resistance | 1.6±0.1Ω,100m@20ºCloop | ||
Resistance Tensile strength | ≥300kg,resistant to repeated reaction and release times≥1000 | ||
Insulation strength | ≥3500Vdc,1min no breakdown | ||
Cable length | standard equipment 220m,optional 330m | ||
Outer diameter | 6.3±0.1mm | ||
Weight | 44±1g/m | ||
Air module |
Input voltage | 580~810Vdc wide range input | |
Output voltage | 59Vdc±1%,constant voltage output,support voltage customization | ||
Output power | ≥18000W(rated long-term output),≥22000W(peak value≮10s) | ||
Protection function | Input over voltage,under voltage protection,output over voltage,over current,short circuit,and over temperature protection | ||
Communication function | Optional CAN communication to report voltage, current, temperature data and operating status information. | ||
Isolation voltage | ≥3000V(Vin-Vout),1min,Current leakage 5mA,no breakdown,flying arc and corona phenomena | ||
Installation method | Replacement of one drone battery, direct plug-and-play installation | ||
Heat dissipation | Built-in fan for active cooling, reserved air ducts for forced air cooling | ||
Interface | Input LP20 air plug,output XT90,XT60×2 | ||
Protection level | IP54 | ||
Size | 468×308×142±0.5mm,excluding connector | ||
Weight | 10.8±0.2kg(Replacement of one 11.5kg drone battery) | ||
Packages | Size | wheeled suitcase:850×740×600±5mm(Wheels not included) | |
Weight | 115±5kg,Storage of ground power module, air module, trailer (optional), Annexes and documents |
The applications of Tethered Drone
The tethered UAV can be applied in situations and environments that require long-time operation, making up for the shortcomings of short endurance time, faster power consumption with more mounts, and the need for frequent battery replacement. It expands the industry application of UAV.