Customization: | Available |
---|---|
Ground Power Module Input Voltage: | 190-240VAC |
Ground Power Module Output Voltage: | 600-800VDC |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Items | Technical parameters | ||
Model | TPS55M-2KW Ver. 3.0 | TPS110M-2KW Ver. 3.0 | |
Cable length | 55M | 110M | |
Ambient temperature | -20~45 ºC (working), -40~65 ºC (storage) | ||
Relative humidity | 10-80% RH (working), 5-90% RH (storage) | ||
Altitude | ≤ 3000m | ||
Ground power module | Input voltage | 190-240Vac wide range input, single-phase 220Vac@50/60Hz | |
Output voltage | 600~800Vdc adjustable, factory default 750Vdc | ||
Output power | 3500W (rated long-term output), 3850W (peak value ≤ 30s) | ||
Storage cable length | Standard storage cable 55m; 110m is optional | ||
Retraction speed | 0-2m/s, adjustable | ||
Reel in/out tension | 0-10N, adjustable | ||
Interface | Input socket with switch, communication Type-C port, cable output XT60 connector | ||
Buttons and switches | High-voltage on/off button, cable forced retraction button, AC switch, backup battery switch for reel in cable | ||
Protection level | IPx4 | ||
Size | 360 × 180 × 260 ± 0.5mm, excluding foot pads and handles | ||
Weight | 8.5 ± 0.2kg, not including weight of tethered cable | ||
Cable | Material | Silver plated lightweight high-temperature resistant aviation wire, lightweight high-temperature resistant sheath | |
Current | 3-5A | ||
DC resistance | 10.5 ± 0.2 Ω, 100m@20 ºC loop | ||
Tensile strength | ≥ 20kg, resistant to repeated retraction and release times ≥ 500 times | ||
Insulation strength | ≥ 3000Vdc, no breakdown for 1 minute | ||
Cable length | Standard storage cable 55m; 110m is optional | ||
Outer diameter | 2.3 ± 0.1mm | ||
Weight | 1.0 ± 0.05kg/100m | ||
Air module | Input voltage | 580~810Vdc wide range input | |
Output voltage | 25 ± 0.3Vdc or 50 ± 0.5Vdc, constant voltage output, supporting voltage customization | ||
Output power | 2000W (rated long-term output), 2500W (peak value ≤ 10s) | ||
Protection function | Input overvoltage and undervoltage protection Output overvoltage, overcurrent, short circuit, and over temperature protection |
||
Isolation voltage | 3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | ||
Installation method | Reserved installation ears, fixed with screws | ||
Heat dissipation method | External fan active heat dissipation, reserved air duct forced air cooling | ||
Interface | Input XT60, output XT90*2 | ||
Protection level | IP54 | ||
Size | 145 × 60 × 42 ± 0.5mm, excluding mounting lugs | ||
Weight | 510 ± 20g, excluding external connectors | ||
Packing | Size | 550×420×260±5mm (Backpack size) 600×480×320±5mm (Carton Size) |
|
Weight | 13.5±0.5kg | 14.0±0.5kg |
Important safety notice of Drone Tethered Power System:
1.More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual
2. The operator should receive professional training and examination, untrained personnel do not handle this product
3. Don't be drunk, poor state of fatigue, sick when handling this product
4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger
5. Please fly under the safe take-off weight, in case of any risks.
6. Please not fly under strong electromagnetism interference circumstance
7. Please follow the local laws and regulations and not fly in no-fly zone
8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers.
9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V
10. The battery long time no use, please store it in ventilated dry place with 60% electricity
Q1: Do you support OEM/ODM?
A1: Yes. We can print your logo on the product.
Q2: About samples.
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
Q3: What is the delivery time?
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity).
In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity?
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost?
A5: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. if you think it's expensive for you. You can always make your own choice.