3000W with Fiber Optic Tethered Drone Station for Data Communication

• Customization: Available
• Ground Module Input Voltage: 190V to 240V
• Ground Module Onput Voltage: 600~800V
• Model NO.: TPS110M-3000W
• Ground Module Output Power: Greater Than or Equal to 4000W
• Ground Module Protection Level: Ipx4
• Cable Length: 110m/220m
• Air Module Iutput Voltage: 580~810V
• Air Module Output Voltage: 25V/50V
• Air Module Output Power: Greater Than or Equal to 3000W
• Air Module Protection Level: IP54
• Gross Weight: 15kg
• Transport Package: Carton Box
• Specification: 550x420x260mm
• Trademark: Rosefinch
• Origin: China
• HS Code: 8479811000
• Production Capacity: 1000/Year

Product Description

3000W With Fiber Optic Tethered Drone Station For Data Communication

   
This system can supply up to 3000W of rated power, ensuring that the drone remains airborne for extended periods without the need for battery swaps. With an output voltage selectable between 50V and 25V, it caters to various drone models. The 3000W Drone Tethered Station, deployed three times, creates a network for comprehensive aerial surveillance or communication relay, significantly enhancing mission effectiveness and coverage area. 

The Strengths of Tethered Drone System With Fiber Optic  

Tethered Drones equipped with fiber optic tethers allow for high-speed, stable data communications over fiber optics. Fiber optic tethering cables not only provide continuous power to the drone, but also allow for high-capacity data transmission, which allows the UAV to transmit high-definition video streams, sensor data and other information in real time to ground station. 
 

Application Demonstration

The applications of tethered UAV(Drone patrols, Drone Emergency Lighting, Drone cleaning,etc.)
The tethered UAV system can be applied in situations and environments that require long-time operation, making up for the shortcomings of short endurance time, faster power consumption with more mounts, and the need for frequent battery replacement. It expands the industry application of UAV

I,Typical Characteristic
1). Small size, light weight. It is easy to carry. Rapid deployment.
2). Simple operations, the entire process of drone taking off and landing does not require the operation of ground module.
3). Comprehensive input /output protection,fault elimination and self recover.
4). Fully automatic take up and pay off function, the wire can be rewound once ground power cut off.
5). The air module power supply has a constant voltage output, and the back up battery has no charging and discharging phenomenon.

II,Adapted drone

1). Support flight altitude: ≥100m/200m (tethered cable 110m/220m, reserved safety length).
2). Support takeoff weight: 10-15kg (drone power efficiency varies, this data is for reference only).
3). Supporting flight duration: ≥ 24h (the system can support working duration, which depends on the structure and electrical fatigue resistance of the drone)

 

III,Function characteristics

1). Protection function: Separate design for strong and weak electricity. Input over-voltage, input under-voltage. Output over voltage ,output over current, output circuit, output over temperature protection, input and output voltage resistance≥3000VDC, tethered cable insulation voltage esistance≥3500VDC.
2). Data communication: Wired and wireless communication function. Support remote display and control, client-side data viewing and downloading.Optional fiber optic communication.
3). Data display function: The touch screen displays data such as output voltage, output current,output power, cable outlet length, working duration, installation temperature, total power consumption, fault record, and working status information.
4). Set and adjustment: The display screen supports setting and adjustment the parameters such as reel in/out tension and speed, date and time, output voltage, safety lengths, warning temperature, etc., and support Chinese and English.

5). Alerts and reminds: When the system malfunctions, the display screen scrolls to display fault information, and the buzzer strong sound reminder.
6). Automatic take-up and payoff: Following take off and landing of the drone to synchronously tethered cable automated winch reel in/out, adjusting the tension auto management, and backup battery to activate cable reel in function in case of power cut off.
7). Carry and transport: The ground module is equipped with a handle and foot pads. folding trailer and trolley wheels is optional for transportation.
8). Power supply 5800W/7000Wh outdoor mobile power bank or 4300W/6L gasoline inverter generator is recommended.

 

Detailed Photos

 

IV,Parameters

Items		Technical parameters
Model		TPS110M-3KW Ver. 2.0	TPS220M-3KW Ver. 2.0
Cable length		110M	220M
Ambient temperature		-20~45ºC (working),-40~65ºC (storage)
Relative humidity		10~80%RH (working),5~90%RH (storage)
Altitude		≤3000m
Ground power module	Input voltage	190~240Vac wide range input, single-phase 220Vac,frequency 50/60Hz
	Output voltage	600~800Vdc adjustable,Factory Default 700Vdc
	Output power	≥4000W (Rated Long-Time Output),≥5000W (peak value≮30s)
	Take-up and payoff speed	0~2m/s, adjustable
	take-up and payoff tension	0~15N, adjustable
	Interface	Input aerial plug, cable output XT60 connector, fiber optic FC port (optional)
	Button and switch	AC Switches, high voltage on/off buttons, cable forced reel in buttons, backup battery switch for reel in cable
	Protection level	IPx4
	Size	D450×W360×H280±0.5mm, excluding foot pads and external accessories
	Weight	17.5±0.5kg, excluding tethered cable
Cable	Material	Alloy lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer
	Fiber optic communication	The tethered cable is an optoelectronic composite cable containing tightly wrapped single-mode fiber with optional fiber optic communication.
	Current	5~7A
	DC resistance	6.8±0.2Ω, 100m@20ºCloop
	Resistance Tensile strength	≥100kg, resistant to repeated reaction and release times≥1000
	Insulation strength	≥3500Vdc, 1min, no breakdown
	Cable length	standard equipment 110m, optional 220m; Fiber optic with FC connector (optional).
	Outer diameter	3.4±0.1mm
	Weight	11±1g/m
Air module	Input voltage	580~810Vdc wide range input
	Output voltage	50 ± 0.5Vdc or 25 ± 0.3Vdc, constant voltage output, supporting voltage customization
	Output power	3000W (rated long-term output), 3500W (peak value ≤ 10s)
	Protection function	Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection
	Isolation voltage	3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon
	Installation method	Reserved installation ears, fixed with screws
	Heat dissipation method	External fan active heat dissipation, reserved air duct forced air cooling
	Interface	Input XT60, output XT90*2
	Protection level	IP54
	Size	165 × 93 × 48 ± 0.5mm, excluding mounting lugs
	Weight	910 ± 10g, without external connectors
Packing	Size	550×420×260±5mm (Backpack size) 600×450×300±5mm (Carton Size)
	Weight	15.0±0.5kg, including ground power module, air module, Annexes and documents

1,Unless otherwise specified,All of the above data are in Ta=25ºC,humidity<75%,nominal Input and rated Load.
2,Due to space limitations,there is incomplete data in the sheet.please contact our sales personnel to obtain it.

Why Choose Us

We can customized it for your drones, whatever you are drone manufacturer and drone service provider,It can make your drone to work for longer time in future

We have drone tether station of Dji drone, 

01.DJI Mavic 3 Tethered Power System..

02.DJI M30 Tethered Power System.

03.DJI M350 Tethered Power System

04.DJI Flycart30 Tether power system

Whatever you are drone manufacturer and drone service provider,we can customize it for your drones,it can make your drone to work for longer time.

06.600W Universal Tethered Power System

07.2000W Universal Tethered Power System

08.3000W Universal Tethered Power System Ver. 2.0

09.3000W Universal Tethering Power Station Ver. 1.0

10.6000W Universal Tethered Power System

11.12000W Universal Tethered Power Supply System

12.18000W Universal Tethered Power Supply System

Tethered Drone Lighting System

13.640W Matrix Lighting 

14.1280W Matrix Lighting  

Certifications

 

What should be noted when we test tethered drones?
Firstly, understand how to connect tether station and drones. The following figure is for reference only.

1.The air module and backup battery connect in parallel.
2.After receiving our tether power system, check whether the outer packaging is intact and damaged.Open the packaging and check if the system are intact. If there is any damage, please communicate with our sales as soon as possible to obtain a timely solution, repair or compensation from shipping company since we always buy insurance for our goods. 

3.Read the user manual carefully and the cautions please.

4. Connect ground module and air module.Connect AC input power supply to the tether system, turn on high voltage , and use amultimeter to check if the power and voltage output of the air module are normal. Make sure there are no issues, then you can connect the drone. 

5.Tum off tether system. After connecting cable power system with the drone , tum on high voltage and observe whether the voltage on drone's remote control and connection of the drone are normal. 

6.For safety reasons, it is recommended to test the endurance of the drone first.Connect tether system and drone, place drone on a testing platform to verify its endurance by testing different throttle settings. When it is confirmed that the endurance of the drone is not a problem, the drone can be taken off for flight testing.
 

FAQ

Q1: What is a tethered power supply for drones?
A1: The tethered power system consists of ground module, cable, and air module which are transmitted through cables to provide continuous power to the UAV. 

Q2: Is the tethered power supply suitable for all types of drones?
A2: While our tethered power supply is compatible with a wide range of drones, it is specifically designed to work best with drones that are equipped to handle the weight and drag of the tether. We recommend checking the specifications of both the drone and the power supply to ensure compatibility. Our technical support team is available to assist with any integration questions. 

Q3: What are the main applications of a tethered power supply?
A3: Tethered power supplies are ideal for applications that require prolonged aerial presence, such as:
Surveillance and Security
Communication Relay
Live Streaming
Inspection and Monitoring

Q4: Do you support OEM/ODM? 
A4: Yes. We can print your logo on the product. 

Q5: What is the delivery time? 
A5: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution. 

Q6: What is the minimum order quantity? 
A6: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.



If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.