M300 Constant Voltage Security Inspection Tether Drone Power Station

• Customization: Available
• Cable Length: 110m
• Output Power: 3000W
• Model NO.: TPS110M-M300/M350
• Cable Collection Type: Automatic Reel in and out
• Hovering Time: 24 Hours
• Input Voltage: 110-220V
• Transport Package: Carton Case
• Specification: 360*280*165
• Trademark: Rosefinch
• Origin: Nanjing, China
• Production Capacity: 1000/Year

Product Description

M300 Constant Voltage Security Inspection Tether Drone Power Station

 

1. Typical characteristics

1). Small in size, light weight, backpack storage, easy to carry, with a tethered box weighing only 8.5kg.

2). Air module power supply 980g< single TB60 battery 1350g, safe replacement and non-destructive mounting.

3). Replace a battery without changing any structure of the drone, and seamlessly switch between tethering mode or free flight mode.

4). The operation is simple, and the entire process of unmanned aerial vehicle takeoff and landing does not require the operation of the mooring box, truly automatically reel in/out.

5). The air module power supply has a constant voltage output, and the backup battery has no charging or discharging phenomenon throughout the entire process, without losing power or causing hidden damage.

 

2. Adapted to DJI M300/350

Support flight duration	≥ 24 hours
Support flight altitude	≥100m (tethered cable 110m, reserved safety length)
Optional lighting group	640W (JM640) or 1280W (JM1280)

 

3. Functional characteristics

Automatic reel in/out

Communication function

Protection function

Data display function

Set adjustment

Fault alarm function

Equipment carrying

4.Parameters

Items		Technical parameters
Tethering power module	Input voltage	176-264Vac wide range input, single-phase 220Vac@45-65Hz
	Output voltage	400~750Vdc adjustable, factory default 750Vdc
	Output power	3500W (rated long-term output), 3850W (peak value ≤ 30s)
	Storage cable length	supporting maximum storage cable ≥ 120m
	Retraction speed	0-2m/s, adjustable
	Pulling force	0-10N, adjustable
	Interface	Input socket with switch, cable output XT60 connector
	Keys and switches	high-voltage on/off button, cable strong retraction button, alarm indicator light
	Size	360 × 280 × 165 ± 0.5mm, excluding foot pads and handles
	Weight	9.2 ± 0.2kg, including 110m tethered cable
Tether cable	Material	Silver plated copper wire wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer
	Current	3-5A
	DC resistance	10.5 ± 0.2 Ω, 100m@20 ºC loop
	Tensile strength	≥ 50kg, resistant to repeated retraction and release times ≥ 500 times
	Insulation strength	≥ 3000Vdc, no breakdown for 1 minute
	Cable length	55/110 ± 2m, supporting customized line length
	Outer diameter	2.6 ± 0.2mm
	Weight	1.2 ± 0.05kg/100m
Air module	Input voltage	600~830Vdc wide range input
	Output voltage	51.5 ± 0.5Vdc, constant voltage output
	Output power	3000W (rated long-term output), 3500W (peak value ≤ 10s)
	Protection function	Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection
	Isolation voltage	3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon
	Installation method	plug-in installation, the same as the original battery installation method, without any modifications to the drone and aviation box
	Heat dissipation method	Natural air cooling
	Interface	Input XT60, output battery interface (powered by drones), output XT60 (powered by lighting)
	Protection level	IP54
	Size	158 × 92 × 110 ± 0.5mm (replace one TB60 battery without occupying additional installation space)
	Weight	960 ± 10g

1. Unless otherwise specified, the above data are all tested at Ta=25 ºC, humidity<75%, nominal input, and rated load.
2. Due to space limitations, there is incomplete data in the table. If necessary, please contact our sales personnel to obtain it.

Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.
The system is compatible for all multi rotor drones with MTOW 5-110kg.
The cable length ranging from 33 to 330m.