Drone Tether Wire Optic 12000W Power Supply System 50V

• Customization: Available
• Cable Length: 33m,55m,110m,220m,330m.
• Output Power: 10000W-12000W
• Model NO.: 1.12000W Drone tether wire optic
• Cable Winding Type: Manual Button to Wind Cable Auto
• Hovering Time: 24 Hours
• Input Voltage: 110-220V
• Tethering Power Solution: Drone Tethered Power System
• Transport Package: Carton Case
• Specification: 645*550*350mm
• Trademark: Rosefinch
• Origin: Nanjing, China
• HS Code: 8504401500
• Production Capacity: 5000/Year

Product Description

Drone tether wire optic 12000W Power Supply System 50v





(Power supply-Ground module-Air module-tether drones)



A power tether drone system TPS220M-6000W 


1. Typical characteristics

1). Small size, light weight, easy to carry, and fast deployment.
2). Easy to operate, no need to operatetethering boxduring UAV flight.
3). Comprehensive input and output protection function, fault elimination and self recovery.
4). Automatic take-up, and manual button to rewind whenpower cut off.
5). The on-board power supplyhas output at constant voltage, and the backup battery remains fully charged throughout the entire process without any power loss.


2. Adaptive drone

1). Support flight altitude: 200/300m (tethered cable 220/330m, reserved safety length).
2). Support takeoff weight: 40-55kg (drone power efficiency varies, this data is for reference only).
3). Support flight duration: ≥ 48h (the system can support working duration, which depends on the structure and electrical fatigue resistance of the drone).

3. Functional characteristics

1). Cable retraction and release function: Follow the drone's takeoff and landing to synchronously retract and release the mooring cable, adaptively adjust the tension, and manual button to rewind when power cut off.
2). Communication function: It has wired communication function with serial port protocol and supports wireless communication function with Bluetooth or wireless serial port protocol.
3). Protection function: Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, over temperature protection, fault elimination and self recovery.
4). Data display function: The 4.0 inch touch screen displays data such as voltage, current, temperature, cable outlet length, date, time, operation records, fault records, and working status information.
5). Setting and adjustment function: The display screen supports the setting and adjustment of wire winding speed, wire winding tension, wire release tension, safety length, date and time, and supports switching between Chinese and English display.
6). Fault alarm function: When the system malfunctions, the display screen scrolls to display fault information, and the fault alarm light flashes red and beeps to alert.


 

4.Parameters
 

Items		Technical parameters
Ambient temperature		-20~45 ºC (working), -40~65 ºC (storage)
Relative humidity		10-80% RH (working), 5-90% RH (storage)
Altitude		≤ 3000m
Tethering power module	Input voltage	320-490Vac wide range input, three-phase five wire system 380Vac/480Vac@45-65Hz
	Output voltage	600~1000Vdc adjustable, factory default 800Vdc
	Output power	15000W (rated long-term output), 20000W (peak value ≤ 30s)
	Storage cable length	Standard storage cable 220m, supporting maximum storage cable ≥ 330m
	Retraction speed	0-3m/s, adjustable
	Reel in/out tension	0-20N, adjustable
	Interface	Input aviation socket, fiber optic FC port (optional),  communication Type-C port, cable output XT60 connector
	Buttons and switches	High-voltage on/off button, cable forced retraction button, input air switch, alarm indicator light
	Size	645 ×550 × 350 ± 0.5mm, excluding foot pads
	Weight	29.5 ± 0.2kg, not including tethered cable weight
Tether cable	Material	Alloy lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer
	Fiber optic (optional)	The tethered cable is an optoelectronic composite cable, which contains tightly packed single-mode fiber optic and can be optionally equipped with fiber optic communication
	Current	15-20A
	DC resistance	2.3 ± 0.1 Ω, 100m@20 ºC loop
	Tensile strength	≥ 300kg, resistant to repeated retraction and release ≥ 1000 times
	Insulation strength	≥ 3000Vdc, no breakdown for 1 minute
	Cable length	220 standard /330 optional ± 2m, supporting customized line length,fiber optic with FC port (optional).
	Outer diameter	5.0 ± 0.2mm
	Weight	2.9 ± 0.1kg/100m
Air module	Input voltage	600~830Vdc wide range input
	Output voltage	50 ± 0.5Vdc, constant voltage output, supporting voltage customization
	Output power	12000W (rated long-term output), 15000W (peak value ≤ 10s)
	Protection function	Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection
	Communication function	CAN communication reports voltage, current, temperature and other data as well as working status information
	Isolation voltage	3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon
	Installation method	Reserved installation ears, fixed with screws
	Heat dissipation method	External fan active heat dissipation, reserved air duct forced air cooling
	Interface	Input XT60, output XT90 * 6
	Protection level	IP54
	Size	302 × 200× 68 ± 0.5mm, excluding mounting lugs
	Weight	4200 ± 100g, excluding external connectors

1. Unless otherwise specified, the above data are all tested at Ta=25 ºC, humidity<75%, nominal input, and rated load.
2. Due to space limitations, there is incomplete data in the sheet. If
 

 

Tether Drone Power System TPS330M-12000W with Cable automatic reel in&out
 

 

For drone tethered power system,you can choose several types from below form:
 

1.DJI Mavic 3 Tethered Power System
2.DJI M30 Tethered Power System
3.DJI M350 Tethered Power System Ver. 2.0
4.DJI M350 Tethered Power System Ver. 1.0.
5.600W Universal Tethered Power System
6.2000W Universal Tethered Power System
7.3000W Universal Tethered Power System V3
8.3000W Universal Tethered Power Station V2
9.3000W Universal Tethering Power Station V1
10.6000W Universal Tethered Power System
11.12000W Universal Tethered Power Supply System
12.18000W Universal Tethered Power Supply System

 

Main Applications of Drone Tethered Power System

-Day and night missions
-Radio relay
-Crisis management
-Site protection
-Traffic surveillance
-Large-scale events security
-Forest surveillance
-Industry monitoring
-Air-quality monitoring
 

Important safety notice of Drone Tethered Power System

1. More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual
2. The operator should receive professional training and examination, untrained personnel do not handle this product
3. Don't be drunk, poor state of fatigue, sick when handling this product
4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger
5. Please fly under the safe take-off weight, in case of any risks.
6. Please not fly under strong electromagnetism interference circumstance
7. Please follow the local laws and regulations and not fly in no-fly zone
8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers.
9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V
10. The battery long time no use, please store it in ventilated dry place with 60% electricity

 

Our service
Our Main Solutions
1. Mapping, surveying and 3D modeling
2. Surveillance
3. Inspection
4. Delivery
5. Customization according to application and client's requirements

 

Company Information
 

The "Drone Tethered Power System" - Rosefinch Technology is the leading manufacturer of drone tethering power station.Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.The system is compatible for all multi rotor drones.
 

 

 

 

FAQ

Q1: Do you support OEM/ODM? 
A1: Yes. We can print your logo on the product.
 Q2: About samples. 
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
 Q3: What is the delivery time? 
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity? 
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost? 
A6: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.


If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.