Drone Accessories Automated Winch Reel Tether Drone Power Supply
Tethered drones can be equipped with high-definition cameras and infrared devices to conduct 24-hour uninterrupted surveillance in key urban areas, large-scale event venues, or border lines. Compared to traditional surveillance towers, they offer the advantages of flexible deployment and broad field of view, effectively expanding the monitoring range and promptly identifying potential safety hazards.
1.Typical characteristics
1). Small size, light weight. It is easy to carry. Rapid deployment.
2). Simple operations, the entire process of drone taking off and landing does not require the operation of ground module.
3). Comprehensive input /output protection,fault elimination and self recover.
4). Fully automatic take up and pay off function, the wire can be rewound once ground power cut off.
5). The air module power supply has a constant voltage output, and the back up battery has no charging and discharging phenomenon.
2. Adapt to drones
1). Supporting flight altitude: ≥100m/200m (tethered cable length 110m/220m, reserve safe length.)
2). Supporting takeoff weight: 10~15kg (UAV force effect varies, this data is for reference only.)
3). Supporting flight duration: ≥24h (The system can support working hours depending on the structure of the UAV and the electrical fatigue resistance.)
3. Functional characteristics
1). Protection function: Separate design for strong and weak electricity. Input over-voltage, input under-voltage. Output over voltage ,output over current, output circuit, output over temperature protection, input and output voltage resistance≥3000VDC, tethered cable insulation voltage esistance≥3500VDC.
2). Data communication: Wired and wireless communication function. Support remote display and control, client-side data viewing and downloading.Optional fiber optic communication.
3). Data display function: The touch screen displays data such as output voltage, output current,output power, cable outlet length, working duration, installation temperature, total power consumption, fault record, and working status information.
4). Set and adjustment: The display screen supports setting and adjustment the parameters such as reel in/out tension and speed, date and time, output voltage, safety lengths, warning temperature, etc., and support Chinese and English.
5). Alerts and reminds: When the system malfunctions, the display screen scrolls to display fault information, and the buzzer strong sound reminder.
6). Automatic take-up and payoff: Following take off and landing of the drone to synchronously tethered cable automated winch reel in/out, adjusting the tension auto management, and backup battery to activate cable reel in function in case of power cut off.
7). Carry and transport: The ground module is equipped with a handle and foot pads. folding trailer and trolley wheels is optional for transportation.
8). Power supply 5800W/7000Wh outdoor mobile power bank or 4300W/6L gasoline inverter generator is recommended.
Tether cable
| Material |
Alloy lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer |
| Working current |
5~7A |
| DC resistance |
6.8 ± 0.2 Ω, 100m loop @ 20 ºC |
| Tensile strength |
≥ 100kg, resistance to repeated retraction and release ≥ 1000 times |
| Insulation strength |
≥ 3500Vdc, no breakdown for 1min |
| Cable length |
110 ± 2m, standard equipment 110m, optional 220m;
Fiber optic with FC connector (optional). |
| Outer diameter |
3.4± 0.1mm |
| Weight |
11± 1g/m |
Air module power supply
| Input voltage |
580~810Vdc wide range input, constant voltage output |
| Output voltage |
50 ± 0.5Vdc or 25 ± 0.3Vdc, constant voltage output, supporting voltage customization |
| Output power |
3000W (rated long-term output), 3500W (peak value ≤ 10s) |
| Installation method |
reserved installation lug and fixed with screws |
| Heat dissipation mode |
External fan active heat dissipation, reserved air duct forced air cooling |
| Interface |
Input XT60, output XT90*2 |
| Size |
165 × 93× 48 ± 0.5mm (excluding mounting lug and interface) |
| Weight |
910 ± 10g, without external connectors |
Ground module
| Input voltage |
190~240Vac wide range input, single-phase 220Vac,frequency 50/60Hz |
| Output voltage |
600~800Vdc adjustable,Factory Default 700Vdc |
| Output power |
≥3500W (Rated Long-Time Output),≥4000W (peak value≮30s) |
| Take-up and payoff speed |
0~2m/s, adjustable |
| take-up and payoff tension |
0~15N, adjustable |
| Interface |
Input aerial plug, cable output XT60 connector, fiber optic FC port (optional) |
| Button and switch |
AC Switches, high voltage on/off buttons, cable forced reel in buttons, backup power switch for reel in cable |
| Protection level |
IPx4 |
Size
|
D450×W360×H280±0.5mm, excluding foot pads and external accessories
|
Weight
|
17.5±0.5kg, excluding tethered cable
|
Main Applications of Drone Tethered Power System
-Day and night missions
-Radio relay
-Crisis management
-Site protection
-Traffic surveillance
-Large-scale events security
-Forest surveillance
-Industry monitoring
-Air-quality monitoring
For drone tethered power system,you can choose several types from below form:
1.DJI Mavic 3 Tethered Power System
2.DJI M30 Tethered Power System
3.DJI M350 Tethered Power System V2
4.DJI M350 Tethered Power System V1
5.DJI Flycart30 Tether power system
6.600W Universal Tethered Power System
7.2000W Universal Tethered Power System
8.3000W Universal Tethered Power System V3
9.3000W Universal Tethered Power Station V2
10.3000W Universal Tethering Power Station V1
11.6000W Universal Tethered Power System
12.12000W Universal Tethered Power Supply System
13.18000W Universal Tethered Power Supply System
Audited Supplier 
){kind=link}