Uav Tethered Power System with 110 Metres of Cable for Dji M30

• Customization: Available
• Ground Module Input Voltage: 190~240V
• Ground Module Output Voltage: 600~800V
• Model NO.: TPS110M-M30
• Ground Module Output Power: Greater Than or Equal to 3500W
• Overall Weight: 9.2kg
• Cable Length: 110m
• Current: 3~5A
• Transport Package: Carton Box
• Specification: 600*450*300mm
• Trademark: Rosefinch
• Origin: China
• HS Code: 8479811000
• Production Capacity: 1000/Year

Product Description

UAV Tethered Power System With 160 Metres Of Cable For DJI M30

    Designed specifically for the DJI M30, this tethered power system is equipped with a 160-metre long cable, greatly expanding the drone's ability to sustain operations. No need to worry about battery life, the system ensures that the drone can carry out surveillance, mapping, emergency communication and other tasks at high altitude for a long time through stable power supply.

I,Typical Characteristic 

1.Small size,light weight and backpack storage.it is easy to carry.

2.Simple operations,the entire process of drone taking off and landing does not require the operation of ground module .
3.Comprehensive input /output protection,fault elimination and self recover.
4.Fully automatic take up and pay off function,the wire can be rewound under power loss.
5.The air module power supply has a constant voltage output,and the back up battery has no charging and discharging phenomenon.
6.The air module power supply replaces a single drone battery without any structural changes to the drone.

II,Adapted M30 drone
1.Supporting flight duration:≥24h.
2.Supporting flight altitude:≥100m(Reserve safe length).

III,Function characteristics
1.Protection functions:Separate design for strong and weak electricity.input overvoltage and undervoltage protection,output overvoltage ,output overcurrent,output circuit,output over temperature protection,input and output voltage resistance≥3000VDC,tethered cable insulation voltage resistance≥3500VDC.
2.Data communication:wired and wireless communication function,Support remote display and control,client-side data viewing and downloading.
3.Data display function:The touch screen displays data such as output voltage,output current,output power, cable outlet length,working duration,installation temperature,total power consumption,fault record,and working status information.
4.Set and adjustment:the display screen supports setting and adjustment the parameters such as take-up and payoff tensile and speed,data and time,output voltage,safety lengths,warning temperature,ect...,and support the switching between Chinese and English.
5.Alerts and reminds:Failure the screen displays the contents of the fault,the buzzer strong sound reminder.
6.Automatic take-up and payoff:following take off and landing of the drone to synchronously tethered cable take-up and payoff,adjusting the tension auto management,and manually press the button to reaction the cable while power cut off.
7.Carry and transport:equipment portability,with a backpack design,it can be equipped with a complete set of tethered power system.
8.Power supply is optional 2800W/5000Wh,outdoor mobile power or 2800W/4L gasoline inverter generator (specification attached).
 

IV,Parameters

items		Technical parameters
Model		TPS55M-M30	TPS100M-M30
Cable length		55M	110M
Ambient temperature		-20~45ºC(working),-40~65ºC(storage)
Relative humidity		10~80%RH(working),5~90%RH(storage)
Altitude		≤3000m
Ground power module	Input voltage	190~240Vac wide range input,single-phase 220Vac,frequency 50/60Hz
	Output voltage	600~800Vdc adjustable,Factory Default 800Vdc
	Output power	≥3500W(Rated Long-Time Output),≥4000W(peak value≮30s)
	take-up and payoff speed	0~2m/s,adjustable
	take-up and payoff tensile	0~10N,adjustable
	interface	Input switched 3-pole socket,tethered cable output XT60 connector
	Button and switch	High-voltage on/off button,cable forced retraction button,back up battery button
	Protection level	IPx4
	Size	D360×W180×H260±0.5mm,excluding foot pads and handles
	Weight	8.5±0.2kg,excluding tethered cable
Tethered cable	Material	Silver plated lightweight high-temperature resistant aviation wire,lightweight high-temperature resistant sheath.
	Current	3~5A
	DC resistance	10.5±0.2Ω,100m@20ºCloop
	Resistance Tensile strength	≥20kg,resistant to repeated reaction and release times≥500
	Insulation strength	≥3500Vdc,1min,no breakdown
	Cable length	110m
	Outer diameter	2.3±0.1mm
	weight	10±0.5g/m
Air module	Input voltage	580~810Vdc wide range input
	Output voltage	25.2Vdc±1%,constant voltage output,support voltage customization
	Output power	≥2000W(rated long-term output),≥2500W(peak value≮10s)
	Protection function	Input over voltage,under voltage protection,output over voltage,over current,short circuit,and over temperature protection
	Isolation voltage	≥3000V(Vin-Vout),1min,Current leakage 5mA,no breakdown,flying arc and corona phenomena
	Installation method	Replacement battery latch,direct plug-In installation
	Heat dissipation	External fan for active cooling, reserved air ducts for forced air cooling
	Interface	Input XT60,output XT60,output battery interface
	Protection level	IP54
	Size	156×75×48±0.5mm(Replaces one drone battery without taking up additional installation space)
	Weight	640±10g(Replace a 685g drone battery with non-destructive mounting)
packages	Size	550×420×260±5mm(backpack size),600×450×300±5mm(Carton Size)
	Weight	14.5±0.5kg,including ground power module,air module,Annexes and documents

1,Unless otherwise specified,All of the above data are in Ta=25ºC,humidity<75%,nominal Input and rated Load.
2,Due to space limitations,there is incomplete data in the sheet.please contact our sales personnel to obtain it.

For drone tethered power system,you can choose several types from below form:

1. DJI Mavic 3 Tethered Power System
2. DJI M30 Tethered Power System
3. DJI M350 Tethered Power System V2
4. DJI M350 Tethered Power System V1
5. DJI Flycart30 Tether power system
6. 600W Universal Tethered Power System
7. 2000W Universal Tethered Power System
8. 3000W Universal Tethered Power System V3
9. 3000W Universal Tethered Power Station V2
10. 3000W Universal Tethering Power Station V1
11. 6000W Universal Tethered Power System
12. 12000W Universal Tethered Power Supply System
13. 18000W Universal Tethered Power Supply System

Main Applications of Drone Tethered Power System
-Day and night missions
-Radio relay
-Crisis management
-Site protection
-Traffic surveillance
-Large-scale events security
-Forest surveillance
-Industry monitoring
-Air-quality monitoring

Important safety notice of Drone Tethered Power System
 

1. More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual
2. The operator should receive professional training and examination, untrained personnel do not handle this product
3. Don't be drunk, poor state of fatigue, sick when handling this product
4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger
5. Please fly under the safe take-off weight, in case of any risks.
6. Please not fly under strong electromagnetism interference circumstance
7. Please follow the local laws and regulations and not fly in no-fly zone
8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers.
9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V
10. The battery long time no use, please store it in ventilated dry place with 60% electricity

Our service
Our Main Solutions
1. Mapping, surveying and 3D modeling
2. Surveillance
3. Inspection
4. Delivery
5. Customization according to application and client's requirements
 

Company Information

The "Drone Tethered Power System" - Rosefinch Technology is the leading manufacturer of drone tethering power station.Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.The system is compatible for all multi rotor drones.

 

FAQ

Q1: Do you support OEM/ODM? 
A1: Yes. We can print your logo on the product.
 Q2: About samples. 
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
 Q3: What is the delivery time? 
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity? 
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost? 
A5: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.


If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.