3000W Tethered Drone System With CAN Communication Function
How 3000w Tethered Drone Power Station to work
The tethered power system consists of ground module, cable, and air module which are transmitted through cables to provide continuous power to the UAV.
Application Demonstration
The applications of tethered UAV
The tethered UAV can be applied in situations and environments that require long-time operation, making up for the shortcomings of short endurance time, faster power consumption with more mounts, and the need for frequent battery replacement. It expands the industry application of UAV
I,Typical Characteristic
1).Small size, light weight, backpack storage, easy to carry.
2). Easy to operate, no need to operate tethering box during UAV flight.
3). Comprehensive protection function, fault elimination and self recovery.
4). Automated winch reel system.
5). Airborne power supply constant voltage output, the backup battery has no charging or discharging phenomenon throughout the entire process, without losing power or causing hidden damage.
II,Adapted drone
1). Support flight altitude: ≥50m/100m/150m (tethered cable 55m/110m/160m, reserved safety length).
2). Support takeoff weight: 10-15kg (drone power efficiency varies, this data is for reference only).
3). Supporting flight duration: ≥ 48h (the system can support working duration, which depends on the structure and electrical fatigue resistance of the drone)
III,Function characteristics
1). Automatic reel in/out: Follow the takeoff and landing of the UAV to synchronously cable reel in/out, automated adjust the tension, and backup battery to activate cable reel in function in case of power cut off.
2). Communication function: Wired and wireless communication function, support remote display and control, client-side data viewing and downloading.
3). Protection function: Separate design for strong and weak electricity. Input and output voltage resistance≥3000VDC, tethered cable insulation voltage resistance≥3500VDC. Input overvoltage and undervoltage protection. Output overvoltage, overcurrent, short circuit, over temperature protection, fault elimination and self recovery.
4). Data display function: The touch screen displays data such as output voltage, output current,output power, cable outlet length, working duration, installation temperature, total power consumption, fault record, and working status information.
5). Set adjustment: The display screen supports the setting and adjustment of wire winding speed, wire winding tension, wire reel out tension, safety length, date and time, and supports Chinese and English display.
6). Fault alarm function: When the system malfunctions, the display screen scrolls to display fault information, and beeps to alert.
7). Equipment carrying: With a backpack design, the backpack can be equipped with a complete set of tethering systems, including a tethering box, air module power supply, lighting unit (optional), and other accessories. The overall weight is 12 ± 0.5kg.
8). 5800W/7000Wh outdoor mobile power bank or 4300W/6.0L generator is recommended.
Detailed Photos
IV,Parameters
| Items |
Technical parameters |
| Model |
TPS55M-3KW
Ver. 3.0 |
TPS110M-3KW
Ver. 3.0 |
TPS160M-3KW Ver. 3.0 |
| Cable length |
55M |
110M |
160M |
| Ambient temperature |
-20~45 ºC (working), -40~65 ºC (storage) |
| Relative humidity |
10-80% RH (working), 5-90% RH (storage) |
| Altitude |
≤ 3000m |
| Ground power module |
Input voltage |
190-240Vac wide range input, single-phase 220Vac@50/60Hz |
| Output voltage |
600~800Vdc adjustable, factory default 700Vdc |
| Output power |
3500W (rated long-term output), 3850W (peak value ≤ 30s) |
| Storage cable length |
Standard storage cable 55m; 110m and 160m are optional |
| Retraction speed |
0-2m/s, adjustable |
| Reel in/out tension |
0-10N, adjustable |
| Interface |
Input socket with switch, communication Type-C port, cable output XT60 connector |
| Buttons and switches |
High-voltage on/off button, cable forced retraction button |
| Protection level |
IPx4 |
| Size |
360 × 180 × 260 ± 0.5mm, excluding foot pads and handles |
| Weight |
8.5 ± 0.2kg, not including tether cable weight |
| Tether cable |
Material |
Silver plated lightweight high-temperature resistant aviation wire, lightweight high-temperature resistant sheath |
| Current |
3-5A |
| DC resistance |
10.5 ± 0.2 Ω, 100m@20 ºC loop |
| Tensile strength |
≥ 20kg, resistant to repeated retraction and release times ≥ 500 times |
| Insulation strength |
≥ 3000Vdc, no breakdown for 1 minute |
| Cable length |
Standard storage cable 55m; 110m and 160m are optional; |
| Outer diameter |
2.3 ± 0.1mm |
| Weight |
10g/meter |
| Air module |
Input voltage |
400~700Vdc wide range input |
| Output voltage |
50 ± 0.5Vdc or 25 ± 0.3Vdc, constant voltage output, supporting voltage customization |
| Output power |
3000W (rated long-term output), 3500W (peak value ≤ 10s) |
| Protection function |
Input overvoltage and undervoltage protection
Output overvoltage, overcurrent, short circuit, and over temperature protection |
| Isolation voltage |
3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon |
| Installation method |
Reserved installation ears, fixed with screws |
| Heat dissipation method |
External fan active heat dissipation, reserved air duct forced air cooling |
| Interface |
Input XT60, output XT90*2 or output XT90*1 |
| Protection level |
IP54 |
| Size |
152 × 126 × 54 ± 0.5mm, excluding mounting lugs |
| Weight |
1200 ± 10g, without external connectors |
| Packing |
Size |
550×420×260±5mm (Backpack size)
600×450×300±5mm (Carton Size) |
| Weight |
15.0±0.5kg, including ground power module, air module, Annexes and documents |
1,Unless otherwise specified,All of the above data are in Ta=25ºC,humidity<75%,nominal Input and rated Load.
2,Due to space limitations,there is incomplete data in the sheet.please contact our sales personnel to obtain it.
Why Choose Us
The "Drone Tethered Power System" - Rosefinch Technology is the leading manufacturer of drone tethering power station.Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.The system is compatible for all multi rotor drones.
Certifications
For drone tethered power system,you can choose several types from below form:
- DJI Mavic 3 Tethered Power System
- DJI M30 Tethered Power System
- DJI M350 Tethered Power System V2
- DJI M350 Tethered Power System V1
- DJI Flycart30 Tether power system
- 600W Universal Tethered Power System
- 2000W Universal Tethered Power System
- 3000W Universal Tethered Power System V3
- 3000W Universal Tethered Power Station V2
- 3000W Universal Tethering Power Station V1
- 6000W Universal Tethered Power System
- 12000W Universal Tethered Power Supply System
- 18000W Universal Tethered Power Supply System
Main Applications of Drone Tethered Power System
-Day and night missions
-Radio relay
-Crisis management
-Site protection
-Traffic surveillance
-Large-scale events security
-Forest surveillance
-Industry monitoring
-Air-quality monitoring
Important safety notice of Drone Tethered Power System
- More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual
- The operator should receive professional training and examination, untrained personnel do not handle this product
- Don't be drunk, poor state of fatigue, sick when handling this product
- Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger
- Please fly under the safe take-off weight, in case of any risks.
- Please not fly under strong electromagnetism interference circumstance
- Please follow the local laws and regulations and not fly in no-fly zone
- Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers.
- Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V
- The battery long time no use, please store it in ventilated dry place with 60% electricity
Our service
Our Main Solutions
1. Mapping, surveying and 3D modeling
2. Surveillance
3. Inspection
4. Delivery
5. Customization according to application and client's requirements
Q1: Do you support OEM/ODM?
A1: Yes. We can print your logo on the product.
Q2: About samples.
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
Q3: What is the delivery time?
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity?
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost?
A5: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.
If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.
Audited Supplier 
){kind=link}