| Customization: | Available |
|---|---|
| Tethering Power Module Input Voltage: | 380VAC |
| Tethering Power Module Output Voltage: | 600~800VDC |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Typical characteristics
1). Easy to operate, no need to operate tethering box during UAV flight.
2). Comprehensive input and output protection function, fault elimination and self recovery.
3). The on-board power supply has output at constant voltage, and the backup battery remains fully charged throughout the entire process without any power loss.
| Items | Technical parameters | |||
| Model | TPS110M-12KW Ver. 2.0 |
TPS220M-12KW Ver. 2.0 |
TPS330M-12KW Ver. 2.0 | |
| Cable length | 110M | 220M | 330M | |
| Ambient temperature | -20~45 ºC (working), -40~65 ºC (storage) | |||
| Relative humidity | 10-80% RH (working), 5-90% RH (storage) | |||
| Altitude | ≤ 3000m | |||
| Tethering power module | Input voltage | 380Vac wide range input, three-phase five wire system 380Vac @50/60Hz | ||
| Output voltage | 600~800Vdc adjustable, factory default 800Vdc | |||
| Output power | 15000W (rated long-term output), 20000W (peak value ≤ 30s) | |||
| Storage cable length | Standard storage cable 110m, 220m and 330m are optional | |||
| Retraction speed | 0-3m/s, adjustable | |||
| Reel in/out tension | 0-20N, adjustable | |||
| Interface | Input aviation socket, fiber optic FC port (optional), communication Type-C port, cable output LP20 aviation connector | |||
| Buttons and switches | High-voltage on/off button, cable forced retraction button, AC switch, backup battery switch for reel in cable | |||
| Size | 600 ×570 × 460 ± 0.5mm, excluding foot pads | |||
| Weight | 54.0 ± 0.5kg, not including tethered cable weight | |||
| Cable | Material | Alloy lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer | ||
| Fiber optic (optional) |
The tethered cable is an optoelectronic composite cable, which contains tightly packed single-mode fiber optic and can be optionally equipped with fiber optic communication | |||
| Current | 15-20A | |||
| DC resistance | 2.3 ± 0.1 Ω, 100m@20 ºC loop | |||
| Tensile strength | ≥ 200kg, resistant to repeated retraction and release ≥ 1000 times | |||
| Insulation strength | ≥ 3500Vdc, no breakdown for 1 minute | |||
| Cable length | Standard storage cable 110m, 220m and 330m are optional; fiber optic with FC port (optional). | |||
| Outer diameter | 5.0 ± 0.2mm | |||
| Weight | 29g±1g/meter | |||
| Air module | Input voltage | 580~810Vdc wide range input | ||
| Output voltage | 50 ± 0.5Vdc, constant voltage output, supporting voltage customization | |||
| Output power | 12000W (rated long-term output), 15000W (peak value ≤ 10s) | |||
| Protection function | Input overvoltage and undervoltage protection Output overvoltage, overcurrent, short circuit, and over temperature protection |
|||
| Isolation voltage | 3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | |||
| Installation method | Reserve installation holes and fix them with screws. | |||
| Heat dissipation method | External fan active heat dissipation, reserved air duct forced air cooling | |||
| Interface | Input LP20 aviation connector, output XT90 * 6 | |||
| Protection level | IP54 | |||
| Size | 302 × 200× 68 ± 0.5mm, excluding mounting lugs | |||
| Weight | 4200 ± 100g, excluding external connectors | |||
| Packing | Size | 850×740×600±5mm (Wooden Size) | ||
| Weight | 80.0±0.5kg, including ground power module, air module, Annexes and documents | |||
The tethered UAV can be applied in situations and environments that require long-time operation, making up for the shortcomings of short endurance time, faster power consumption with more mounts, and the need for frequent battery replacement. It expands the industry application of UAV.
1.More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual
2. The operator should receive professional training and examination, untrained personnel do not handle this product
3. Don't be drunk, poor state of fatigue, sick when handling this product
4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger
5. Please fly under the safe take-off weight, in case of any risks.
6. Please not fly under strong electromagnetism interference circumstance
7. Please follow the local laws and regulations and not fly in no-fly zone
8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers.
9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V
10. The battery long time no use, please store it in ventilated dry place with 60% electricity
1.DJI Mavic 3 Tethered Power System
2.DJI M30 Tethered Power System
3.DJI M350 Tethered Power System V2
4.DJI M350 Tethered Power System V3
5.DJI Flycart30 Tether power system
6.600W Universal Tethered Power System
7.2000W Universal Tethered Power System
8.3000W Universal Tethered Power System V3
9.3000W Universal Tethered Power Station V2
10.6000W Universal Tethered Power System
11.12000W Universal Tethered Power Supply System
12.18000W Universal Tethered Power Supply System
){kind=link}