| Customization: | Available |
|---|---|
| Cable Length: | 55m/110m |
| Ground Power Module Output Power: | 3500W |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Support flight duration | ≥ 12 hours |
| Support flight altitude | 50m/100m (standard tethered cable 55m, 110m is optional) |
| Optional lighting group | 640W |
| 1).Small in size, light weight, backpack storage, easy to carry, with a tethered box weighing only 8.5kg. 2). Air module power supply 570g< single TB30 battery 685g, safe replacement and non-destructive mounting. 3). Replace a battery without changing any structure of the drone, and seamlessly switch between tethering mode or flying mode. 4). The operation is simple, and the entire process of unmanned aerial vehicle takeoff and landing doesn't require the operation of the tethering box, truly automatically reel in/out. 5). The air module power supply has a constant voltage output, and the backup battery has no charging or discharging phenomenon throughout the entire process, without losing power or causing hidden damage. |
| Items | Technical parameters | ||
| Model | TPS55M-M30 | TPS110M-M30 | |
| Cable length | 55M | 110M | |
| Ambient temperature | -20~45ºC (working),-40~65ºC (storage) | ||
| Relative humidity | 10~80%RH (working),5~90%RH (storage) | ||
| Altitude | ≤3000m | ||
| Ground power module | Input voltage | 190-240Vac wide range input, single-phase 220Vac@50/60Hz | |
| Output voltage | 600~800Vdc adjustable, factory default 750Vdc | ||
| Output power | 3500W (rated long-term output), 4000W (peak value ≤ 30s) | ||
| Storage cable length | Standard tethered cable 55m; 110m is optional | ||
| Retraction speed | 0-2m/s, adjustable | ||
| Reel in and out tension | 0-10N, adjustable | ||
| Interface | Input socket with switch, type-C communication port, cable output XT60 connector | ||
| Buttons and switches | High-voltage on/off button, cable strong retraction button, backup battery switch, AC switch, backup battery switch for reel in cable | ||
| Protection level | IPx4 | ||
| Size | 360 ×180 ×260 ± 0.5mm, excluding foot pads and handles | ||
| Weight | 8.5 ± 0.2kg, not including weight of tethered cable | ||
| Cable | Material | Silver plated lightweight high-temperature resistant aviation wire, lightweight high-temperature resistant sheath | |
| Current | 3-5A | ||
| DC resistance | 10.5 ± 0.2 Ω, 100m@20 ºC loop | ||
| Tensile strength | ≥ 20kg, resistant to repeated reel in&out ≥ 500 times | ||
| Insulation strength | ≥ 3500Vdc, no breakdown for 1 minute | ||
| Cable length | Standard tethered cable 55m; 110m is optional | ||
| Outer diameter | 2.3 ± 0.1mm | ||
| Weight | 10g±0.5g/meter | ||
| Air module | Input voltage | 580~810Vdc wide range input | |
| Output voltage | 25.2 ± 0.3Vdc, constant voltage output | ||
| Output power | 2000W (rated long-term output), 2500W (peak value ≤ 10s) | ||
| Protection function | Input overvoltage and undervoltage protection Output overvoltage, overcurrent, short circuit, and over temperature protection |
||
| Isolation voltage | 3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | ||
| Installation method | Plug-in installation, the same as the original battery installation method, without any modifications to the drone and aviation box | ||
| Heat dissipation method | External fan active heat dissipation, reserved air duct forced air cooling | ||
| Interface | Input XT60, output battery interface (powered by drones), output XT60 (powered by lighting) | ||
| Protection level | IP54 | ||
| Size | 156 ×75 ×48 ± 0.5mm (replace one TB30 battery, smaller than battery size) | ||
| Weight | 570 ± 20g (replace a 685g TB30 battery to reduce the takeoff weight of the drone) | ||
| Packing | Size | 550×420×260±5mm (Backpack size) 600×450×300±5mm (Carton Size) |
|
| Weight | 14.5±0.5kg, including ground power module, air module, Annexes and documents | ||
FAQ
){kind=link}