| Customization: | Available |
|---|---|
| Input Voltage: | 190-240V |
| Output Voltage: | 16.5V/25V |
|
Still deciding? Get samples of US$ 4099/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
TPS55M-600W Tethered Power System
I,Typical characteristics
1.Small size,light weight and backpack storage.it is easy to carry.
2.The operation is simple,and the entire process of drone takeoff and landing does not require the operation of the ground module.
3.Comprehensive input/output protection, fault elimination and self-recovery.
4.The button type take-up function,power back-up take-up in case of power failure.
5.The air module power supply has a constant voltage output,and the back-up battery has no charging or discharging phenomenon throughout the entire process.
II,Adapted to Drone
1.Supporting flight duration:≥30/50m(tethered cable length:33/55M,Reserve safe length.)
2.Supporting takeoff weight:1~3kg(UAV force effect varies, this data is for reference only.)
3.Supporting flight duration:≥48h(The system can support working hours depending on the structure of the UAV and the electrical fatigue resistance.)
III,Function characteristics
1.Protection functions:Separate design for strong and weak electricity .input over voltage and under voltage protection,output over voltage ,output over current,output circuit,output over temperature protection,input and output voltage resistance≥3000VDC,tethered cable insulation voltage resistance≥3500VDC.
2.Automatic take-up and payoff:passive payoff, push-button automatic take-up, and manually press the button to reaction the cable while power cut off.
3.Carrying and transporting:Equipment portability,with a backpack design,it can be equipped with a complete set of tethered power system.
4.Power supply is optional 1800W/3500Whoutdoor mobile power supply or1200W/2.5Lgasoline inverter generator (specification attached).
| items | Technical parameters | ||
| Model | TPS33M-600 | TPS55M-600 | |
| Cable length | 33M | 55M | |
| Ambient temperature | -20~45ºC(working),-40~65ºC(storage) | ||
| Relative humidity | 10~80%RH(working),5~90%RH(storage) | ||
| Altitude | ≤3000m | ||
| Ground power module | Input voltage | 190~240Vac wide range input,single-phase 220Vac,frequency 50/60Hz | |
| Output voltage | 360~400Vdcadjustable,factory default 400Vdc | ||
| Output power | ≥800W(rated long-term output),≥1000W(peak value≮30s) | ||
| Interface | Input 3-pole socket,cable output XT60 connectors | ||
| Button | High voltage button,take-up button | ||
| Protection level | IPx4 | ||
| Size | D265×W150×H175±0.5mm,excluding foot pads and handles | ||
| Weight | 4.3±0.2kg,including tethered cable | ||
| Tethered cable | material | Silver-plated lightweight high-temperature resistant aircraft wire, composite fluoroplastic insulation, high-modulus tensile aerospace-grade fiber braid. | |
| carrying capacity | 1~1.5A | ||
| Direct Current Resistance | 38±0.5Ω,100m@20ºCloop | ||
| Resistance tensile strength | ≥50kg,resistant to repeated reaction and release times≥500 | ||
| Insulation strength | ≥3500Vdc,1min no breakdown | ||
| Cable length | Standard 33m,55m is optional | ||
| External diameter | 2.0±0.1mm | ||
| weight | 4.6±0.2g/m | ||
| Air module power supply | Input voltage | 350~410Vdc wide range input | |
| Output voltage | 16.5Vdc±1% or 5Vdc±1%,constant voltage output,supporting voltage customization | ||
| Output power | ≥600W(rated long-term output),≥800W(peak value≮10s) | ||
| Protection function | Input overvoltage,undervoltage protection,output overvoltage,overcurrent,short circuit,over temperature protection | ||
| Isolation voltage | 3000V(Vin-Vout),1min,Current leakage≤5mA,no breakdown ,flying arc and corona phenomenon | ||
| Installation method | Pre-mounted lugs, screwed in | ||
| Heat dissipation method | Passive heat dissipation,natural air cooling of heat dissipation teeth | ||
| Interface | Input XT60,output XT30×2 | ||
| Protection level | IP54 | ||
| size | 105×56×32±0.5mm,Mounting brackets and connectors not included | ||
| weight | 210±10g,external connection and cables not include | ||
| Packaging | size | 460×350×240±5mm(backpack size),500×400×300±5mm(carton size) | |
| weight | 7.5±0.5kg,including tethered box,onboard power supply,annexes and documents | ||
Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.
The system is compatible for all multi rotor drones with MTOW 3-110kg.
){kind=link}