| Customization: | Available |
|---|---|
| Ground Module Input Voltage: | 190 to 240V |
| Ground Module Onput Voltage: | 600~800V |
|
Still deciding? Get samples of US$ 15000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Comprehensive Protection 6000W Tethered Drone Power Station 6000w Output Power
How UAV tethered power works
The tethered power system consists of ground module, cable, and air module which are transmitted through cables to provide continuous power to the UAV.
KEY FEATURES
| Support flight altitude: | 110m, 160m or 220m |
| Input voltage of Ground power module | 190-240Vac |
| Output voltage of Ground power module | 600~810Vdc adjustable |
| Size and weight of Ground power module | 450 × 360 × 286mm, 17.5KG. |
| Output voltage of Air module | 50.5 ± 0.5Vdc |
| Output power of Air module | 6000W |
| Size and weight of Air module | 200× 150× 68mm,2200G. |
| I,Typical Characteristic |
II,Adapted drone
| 1.Supporting flight altitude | ≥100/200m(tethered cable length 110/220m,Reserve safe length.) |
| Supporting takeoff weight | 20~30kg(UAV force effect varies, this data is for reference only.) |
| Supporting flight duration | ≥48h(The system can support working hours depending on the structure of the UAV and the electrical fatigue resistance.) |
Product Pictures
III,Function characteristics
| items | Technical parameters | ||
| Model | TPS110M-6K | TPS220M-6K | |
| Cable length | 110M | 220M | |
| Ambient temperature | -20~45ºC(working),-40~65ºC(storage) | ||
| Relative humidity | 10~80%RH(working),5~90%RH(storage) | ||
| Altitude | ≤3000m | ||
| Ground power module | Input voltage | 190~240Vac wide range input,single-phase 220Vac,frequency 50/60Hz | |
| Output voltage | 600~800Vdc adjustable,Factory Default 800Vdc | ||
| Output power | ≥7000W(Rated Long-Time Output),≥8000W(peak value≮30s) | ||
| take-up and payoff speed | 0~2m/s,adjustable | ||
| take-up and payoff tensile | 0~15N,adjustable | ||
| interface | Input aerial plug, bollard output XT60 connector, fiber optic FC port (optional) | ||
| Button and switch | AC Switches, high voltage on/off buttons, cable take-up buttons, power backup switches | ||
| Protection level | IPx4 | ||
| Size | D450×W360×H280±0.5mm,excluding foot pads and external accessories | ||
| Weight | 17.5±0.5kg,excluding tethered cable | ||
| Tethered cable | Material | Silver-plated lightweight high-temperature resistant aircraft wire, composite fluoroplastic insulation, high-modulus tensile aerospace-grade fiber braid | |
| Fiber optic communication | The tethered cable is an optoelectronic composite cable containing tightly wrapped single-mode fiber with optional fiber optic communication. | ||
| Current | 7~10A | ||
| DC resistance | 4.6±0.2Ω,100m@20ºCloop | ||
| Resistance Tensile strength | ≥150kg,resistant to repeated reaction and release times≥1000 | ||
| Insulation strength | ≥3500Vdc,1min, no breakdown | ||
| Cable length | standard equipment 110m,optional 220m | ||
| Outer diameter | 3.5±0.1mm | ||
| Weight | 21±1g/m | ||
| Air module | Input voltage | 580~810Vdc wide range input | |
| Output voltage | 50Vdc±1% or 58Vdc±1%,constant voltage output,support voltage customization | ||
| Output power | ≥6000W(rated long-term output),≥7000W(peak value≮10s) | ||
| Protection function | Input over voltage,under voltage protection,output over voltage,over current,short circuit,and over temperature protection | ||
| Communication function | Optional CAN communication to report voltage, current, temperature data and operating status information. | ||
| Isolation voltage | ≥3000V(Vin-Vout),1min,Current leakage 5mA,no breakdown,flying arc and corona phenomena | ||
| Installation method | Pre-mounted lugs, screwed in | ||
| Heat dissipation | External fan for active cooling, reserved air ducts for forced air cooling | ||
| Interface | Input XT60,output XT90×3 | ||
| Protection level | IP54 | ||
| Size | 200×150×68±0.5mm,excluding connector | ||
| Weight | 2.2±0.1kg,excluding outer connector and wire | ||
| packages | Size | wheeled suitcase:720×500×420±5mm(Wheels not included) | |
| Weight | 48±2kg,Storage of ground power module, air module, trailer (optional), Annexes and documents | ||
Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.The "Drone Tethered Power System" - Rosefinch Technology is the leading manufacturer of drone tethering power station.
For drone tethered power system,you can choose several types from below form:
Q1: Do you support OEM/ODM?
A1: Yes. We can print your logo on the product.
Q2: About samples.
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
Q3: What is the delivery time?
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity?
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost?
A5: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.
If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.
){kind=link}