Tethering Power Solution with Airborne Voice Broadcasting Mounting for Dji Drone M30
DJI Drone M30 Airborne Voice Broadcasting Mounting
| 1. Overview and Characteristics |
Adaptable installation: suitable for the onboard interface of DJI drone, and can be used together with a camera;
Easy to operate: Adapted to M30 drones, no software installation required, ready to use upon startup;
Discretionary control: equipped with real-time calling, TTS, recording playback, audio file playback, and alarm playback;
Multiple functions: built-in dual explosion warning light; |
| 2. Application |
Application scenario:
Emergency rescue, information publicity, counter-terrorism tasks, night search; |
| 3. Equipment parameters |
Model: VT30P;
Size: 144mm * 85mm * 75mm;
Weight: 220g;
Control method: Pilot2;
System power: 30W;
Working temperature: -20 ºC~55 ºC;
Sound pressure level: 126dB;
Control distance: consistent with the communication distance of the drone;
Broadcast mode: real-time call out, recorded call out, text to speech, audio file playback, preset alarm;
Text to speech: male voice/female voice/speech speed/intonation/loop;
Pitch angle: 90 °;
Sound distance: 300m;
Work attribute display: built-in dual burst flash warning light;
Warning light power: 16w (instantaneous power);
Applicable model: DJI M30/M30T; |
Tethering Power Solution with Airborne Voice Broadcasting Mounting for Dji Drone M30
Drone Tethered Power System can be customized according to your special needs.
The cable length can be customized from 33-330m long.
The optic fiber cable is available.
The system is compatible for all multi rotor drones with MTOW 5-110kg.
Tethered Power System for Drones M30 TPS110M-M30
| 1. Environmental characteristics |
1) Environmental temperature: -20~45 ºC (working), -40~65 ºC (storage).
2) Relative humidity: 10-80% RH (working), 5-90% RH (storage).
3) Altitude: 0-3000m.
| 2. Air module power supply for Tether Drone dji m30 |
1) Input voltage: 600~830Vdc wide range input.
2) Output voltage: 25.5 ± 0.3Vdc, constant voltage output, supporting voltage customization.
3) Output power: 2000W (rated long-term output), 2500W (peak value ≤10s).
4) Protection function: Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection.
5) Installation method: Tool free plug-in installation, the same as the original battery installation method.
6) Heat dissipation method: An external fan actively dissipates heat, and a reserved air duct is forced air cooling.
7) Interface: Input XT60, output battery interface (powered by drones), output XT60 (powered by lighting).
8) Size: 156 ×75 × 48 ± 0.5mm (replace one TB30 battery without occupying additional installation space).
9) Weight: 570 ± 20g (replace a 685g TB30 battery to reduce the takeoff weight of the drone).
10) Protection level: IP54.
1) Material: Silver plated lightweight high-temperature resistant aviation wire, lightweight high-temperature resistant sheath.
2) Current: 3-5A.
3) DC resistance: 10.5 ± 0.2 Ω, 100m loop @ 20 ºC,
4) Tensile strength: ≥ 20kg, resistant to repeated retraction and release times ≥ 500 times.
5) Isolation voltage: ≥ 3000Vdc, no breakdown after 1 minute.
6) Cable length: 110 ± 2m, supporting customized cable length.
7) Outer diameter: 2.3 ± 0.1mm.
8) Weight: 1.0 ± 0.05kg/100m.
1) Input voltage: 176-264Vac wide range input, single-phase 220Vac@45-65Hz.
2) Output voltage: 600~810Vdc adjustable, factory default 800Vdc.
3) Output power: 3500W (rated long-term output), 3850W (peak value ≤ 30s).
4) Storage cable length: Standard storage cable 110m, supporting maximum storage cable ≥ 160m.
5) Retraction speed: 0-2m/s, adjustable.
6) Reel in and out tension: 0-10N, adjustable.
7) Automatic reel in/out: Follow the takeoff and landing of the UAV to synchronously cable reel in/out, adaptively adjust the tension, and manually retract the cable under power loss conditions.
8) Protection function: Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection.
9) Communication function: It has wired communication function with serial port protocol and supports wireless communication function with Bluetooth or wireless serial port protocol.
10) Data display function: The 4.0 inch touch screen displays data such as voltage, current, temperature, outlet length, date, time, operation records, fault records, and working status information.
11) Set adjustment: The display screen supports the setting and adjustment of wire collection speed, wire collection tension, wire release tension, safety meters, date and time, and supports switching between Chinese and English display.
12) Fault alarm function: When the system malfunctions, the display screen scrolls to display fault information, and the fault alarm light flashes red and beeps to alert.
13) Interface: Input socket with switch, communication Type-C port, cable output XT60 connector.
14) Buttons and switches: High voltage on/off button, strong cable retraction button, and alarm indicator light.
15) Size: 360 ×180 ×260 ± 0.5mm, excluding foot pads and handles.
16) Weight: 9.0 ± 0.2kg, including 110m tethered cable.
17) Protection level: IPx4.
18) System equipment carrying: With a backpack design, the backpack can be equipped with a complete set of tying systems including a tether ground box, air module power supply, lighting unit, and other accessories, with an overall weight of 12 ± 0.5kg.
Parameters for item targets
1. Input voltage of tether ground box: 176-264Vac wide range input, single-phase 220Vac.
2. Air module power supply output voltage: 25.5 ± 0.3Vdc constant voltage output. The UAV operates under the tethered power supply condition, and the backup battery remains fully charged throughout the entire process without any power loss.
3. Equipment output power: air module power supply ≥ 2000W, tether ground box ≥ 3500W.
4. Air module power supply size: ≤ 156 ×75 ×48 mm, replace one TB30 battery without occupying additional installation space.
5. Air module power supply weight: ≤ 590g, replace a 685g TB30 battery.
6. Size of tether ground box: ≤ 360 ×260 × 180mm.
7. Weight of the tether ground box: ≤ 9.2kg, which includes 110m of tether cables.
8. Cable size and weight: length ≥ 110m, cable diameter ≤ 2.4mm, weight ≤ 1.1kg/100m.
9. Automatic reel in/out: Follow the takeoff and landing of the UAV to synchronously cable reel in/out, adaptively adjust the tension, and manually retract the cable under power loss conditions.
10. Overcurrent protection function: When the air module power supply outputs overcurrent, it provides constant current step-down protection. The output should not be directly turned off and can be self restored.
11. Communication function: The tether ground box has a serial protocol wired communication function, and supports wireless communication function of Bluetooth or wireless serial protocol.
12. Data display function: The touch screen displays data such as voltage, current, temperature, outlet length, date, time, operation records, fault records, and working status information.
13. Set adjustment: The display screen supports the setting and adjustment of wire collection speed, wire collection tension, wire release tension, safety meters, date and time, and supports switching between Chinese and English display.
14. Fault alarm function: When the system malfunctions, the display screen scrolls to display fault information, and the fault alarm light flashes red and beeps to alert.
15. System equipment protection level: air module power supply ≥ IP54, tether ground box ≥ IPx4.
16.System equipment carrying: backpack design, the backpack can be equipped with a complete set of tethering system including a tether ground box, air module power supply, lighting unit, and complete accessories, with an overall weight of ≤ 12.5kg.
For drone tethered power system,you can choose several types from below form:
1.TPS33M-M3 Tethered Power System
2. TPS110M-M30 Tethered Power System
3. TPS110M-M300/M350 Tethered Power System New Version
4. TPS110M-M300/M350 Tethered Power system
5. TPS33-600W Universal Tethered Power System
6. TPS110-2000W Universal Tethered Power System
7. TPS160M-3000W Universal Tethered Power System New Version
8. TPS160M-3000W Universal Tethered Power System
9. TPS220M-3000W Universal Tethered Power System
10. TPS220M-6000W Universal Tethered Power System
11. TPS330M-12000W Universal Tethered Power System |
Main Applications of Drone Tethered Power System |
-Day and night missions
-Radio relay
-Crisis management
-Site protection
-Traffic surveillance
-Large-scale events security
-Forest surveillance
-Industry monitoring
-Air-quality monitoring
| Important safety notice of Drone Tethered Power System |
1. More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual
2. The operator should receive professional training and examination, untrained personnel do not handle this product
3. Don't be drunk, poor state of fatigue, sick when handling this product
4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger
5. Please fly under the safe take-off weight, in case of any risks.
6. Please not fly under strong electromagnetism interference circumstance
7. Please follow the local laws and regulations and not fly in no-fly zone
8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers.
9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V
10. The battery long time no use, please store it in ventilated dry place with 60% electricity
Our service
Our Main Solutions
1. Mapping, surveying and 3D modeling
2. Surveillance
3. Inspection
4. Delivery
5. Customization according to application and client's requirements |
The "Drone Tethered Power System" - Rosefinch Technology is the leading manufacturer of drone tethering power station.Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.The system is compatible for all multi rotor drones.
Q1: Do you support OEM/ODM?
A1: Yes. We can print your logo on the product.
Q2: About samples.
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
Q3: What is the delivery time?
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity?
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost?
A6: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.
If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.
Audited Supplier 
){kind=link}