Drone Uav dji Tether Power Supply for Cleaning Solutions 2000W Cable 110m/160m
2000W tether power supply brief introduction
The 2000W UAV Tether Power Supply is a game-changer for cleaning solutions, enabling drones to stay airborne for extended periods without the need for battery swaps. This robust power supply system ensures a continuous flow of energy to the UAV, making it ideal for large-scale cleaning operations. With a 2000W capacity, it supports high-power consumption tasks such as operating water jets or suction equipment for facade cleaning. The 2000W UAV Tether Power Supply's reliability and efficiency make it an indispensable component in modern, automated cleaning services, where drones equipped with this power supply can clean buildings more efficiently than traditional methods. Moreover, the 2000W UAV Tether Power Supply is designed to handle the power demands of advanced cleaning technologies, ensuring that these operations are both effective and eco-friendly.
II,The Tether Power Station Adapted Drone
1.Supporting flight altitude:≥50/100/150m(tethered cable length:55/110/160m,Reserve safe length.)
2.Supporting takeoff weight:5~10kg(UAV force effect varies, this data is for reference only.)
3.Supporting flight duration:≥48h(The system can support working hours depending on the structure of the UAV and the electrical fatigue resistance.)
III,Function characteristics
1.Protection functions:Separate design for strong and weak electricity .input over voltage and under voltage protection,output over voltage ,output over current,output circuit,output over temperature protection,input and output voltage resistance≥3000VDC,tethered cable insulation voltage resistance≥3500VDC.
2.Data communication:wired and wireless communication function,Support remote display and control,client-side data viewing and downloading.
3.Data display function:The touch screen displays data such as output voltage,output current,output power, cable outlet length,working duration,installation temperature,total power consumption,fault record,and working status information.
4.Set and adjustment:the display screen supports setting and adjustment the parameters such as take-up and payoff tensile and speed,data and time,output voltage,safety lengths,warning temperature,ect...,and support the switching between Chinese and English.
5.Alerts and reminds:Failure the screen displays the contents of the fault,the buzzer strong sound reminder.
6.Automatic take-up and payoff:following take off and landing of the drone to synchronously tethered cable take-up and payoff,adjusting the tension auto management,and manually press the button to reaction the cable while power cut off.
7.Carry and transport:equipment portability,with a backpack design,it can be equipped with a complete set of tethered power system.
8.Power supply is optional 2800W/5000Wh,outdoor mobile power or 2800W/4L gasoline inverter generator (specification attached).
IV,Parameters
| items |
Technical parameters |
| Model |
TPS50M-2K |
TPS100M-2K |
TPS150M-2K |
| Cable length |
55M |
110M |
160M |
| Ambient temperature |
-20~45ºC(working),-40~65ºC(storage) |
| Relative humidity |
10~80%RH(working),5~90%RH(storage) |
| Altitude |
≤3000m |
| Ground power module |
Input voltage |
190~240Vac wide range input,single-phase 220Vac,frequency 50/60Hz |
| Output voltage |
600~800Vdc adjustable,Factory Default 800Vdc |
| Output power |
≥3500W(Rated Long-Time Output),≥4000W(peak value≮30s) |
| take-up and payoff speed |
0~2m/s,adjustable |
| take-up and payoff tensile |
0~10N,adjustable |
| interface |
Input switched 3-pole socket,tethered cable output XT60 connector |
| Button and switch |
High-voltage on/off button,cable forced retraction button,back up battery button |
| Protection level |
IPx4 |
| Size |
D360×W180×H260±0.5mm,excluding foot pads and handles |
| Weight |
8.5±0.2kg,excluding tethered cable |
| Tethered cable |
Material |
Silver plated lightweight high-temperature resistant aviation wire,lightweight high-temperature resistant sheath. |
| Current |
3~5A |
| DC resistance |
10.5±0.2Ω,100m@20ºCloop |
| Resistance tensile strength |
≥20kg,resistant to repeated reaction and release times≥500 |
| Insulation strength |
≥3500Vdc,1min, no breakdown |
| Cable length |
standard equipment 55m,optional 110m |
| Outer diameter |
2.3±0.1mm |
| Weight |
10±0.5g/m |
| Air module |
Input voltage |
580~810Vdc wide range input |
| Output voltage |
25Vdc±1% or 50Vdc±1%,constant voltage output,support voltage customization |
| Output power |
≥2000W(rated long-term output),≥2500W(peak value≮10s) |
| Protection function |
Input over voltage,under voltage protection,output over voltage,over current,short circuit,and over temperature protection |
| Isolation voltage |
≥3000V(Vin-Vout),1min,Current leakage 5mA,no breakdown,flying arc and corona phenomena |
| Installation method |
Pre-mounted lugs, screwed in |
| Heat dissipation |
External fan for active cooling, reserved air ducts for forced air cooling |
| Interface |
Input XT60,output XT90×2 |
| Protection level |
IP54 |
| Size |
145×60×42±0.5mm,excluding mounting lugs and connectors |
| Weight |
510±10g,excluding outer connector and wire |
| packages |
Size |
550×420×260±5mm(backpack size),600×450×300±5mm(Carton Size) |
| Weight |
14.5±0.5kg,including ground power module,air module,Annexes and documents |
1,Unless otherwise specified,All of the above data are in Ta=25ºC,humidity<75%,nominal Input and rated Load.
2,Due to space limitations,there is incomplete data in the sheet.please contact our sales personnel to obtain it.
If the 2000W tether power system doesn't meet your needs, we also have:
DJI Mavic 3 Tethered Power System
DJI M30 Tethered Power System
DJI M350 Tethered Power System V2
DJI M350 Tethered Power System V1
DJI Flycart30 Tether power system
600W Universal Tethered Power System
2000W Universal Tethered Power System
3000W Universal Tethered Power System V3
3000W Universal Tethered Power Station V2
3000W Universal Tethering Power Station V1
6000W Universal Tethered Power System
12000W Universal Tethered Power Supply System
18000W Universal Tethered Power Supply System
| DJI Flycart30 Tether power system |
KEY FEATURES
| Support flight altitude: |
110m or 2200m |
| Input voltage of Ground power module |
176-264Vac |
| Output voltage of Ground power module |
600~800Vdc adjustable |
| Size and weight of Ground power module |
600×570×460, 54KG. |
| Output voltage of Air module |
59± 0.2Vdc |
| Output power of Air module |
19200W |
| Size and weight of Air module |
468 × 308 × 142mm,9.8KG. |
| DJI M30 Tethering Drone System |
KEY FEATURES
| Support flight altitude: |
55m or 110m |
| Input voltage of Ground power module |
176-264Vac |
| Output voltage of Ground power module |
600~810Vdc adjustable |
| Size and weight of Ground power module |
360 ×180 ×260mm, 9KG. |
| Output voltage of Air module |
25.5 ± 0.2Vdc |
| Output power of Air module |
2000W |
| Size and weight of Air module |
156 ×75 ×48mm,570G. |
| 6000W Tethering Drone System |
KEY FEATURES
| Support flight altitude: |
110m or 220m |
| Input voltage of Ground power module |
190-240Vac |
| Output voltage of Ground power module |
600~810Vdc adjustable |
| Size and weight of Ground power module |
450 ×360 ×286mm, 17.5KG. |
| Output voltage of Air module |
50± 0.5Vdc |
| Output power of Air module |
6000W |
| Size and weight of Air module |
200 ×150 ×68mm,2200G. |
Why Choose Us
Company Profile
FAQ
Q1: What is a tethered power supply for drones?
A1: The tethered power system consists of ground module, cable, and air module which are transmitted through cables to provide continuous power to the UAV.
Q2: Is the tethered power supply suitable for all types of drones?
A2: While our tethered power supply is compatible with a wide range of drones, it is specifically designed to work best with drones that are equipped to handle the weight and drag of the tether. We recommend checking the specifications of both the drone and the power supply to ensure compatibility. Our technical support team is available to assist with any integration questions.
Q3: What are the main applications of a tethered power supply?
A3: Tethered power supplies are ideal for applications that require prolonged aerial presence, such as:
Surveillance and Security
Communication Relay
Live Streaming
Inspection and Monitoring
Q4: Do you support OEM/ODM?
A4: Yes. We can print your logo on the product.
Q5: What is the delivery time?
A5: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q6: What is the minimum order quantity?
A6: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Audited Supplier 
){kind=link}