| Customization: | Available |
|---|---|
| Ground Power Module Input Voltage: | 190-240VAC |
| Ground Power Module Output Voltage: | 600-800VDC |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Typical characteristics
| 1). Small size, light weight. It is easy to carry. Rapid deployment. 2). Simple operations, the entire process of drone taking off and landing does not require the operation of ground module. 3). Comprehensive input /output protection,fault elimination and self recover. 4). Fully automatic take up and pay off function, the wire can be rewound once ground power cut off. 5). The air module power supply has a constant voltage output, and the back up battery has no charging and discharging phenomenon. |
| 1). Support flight duration: ≥ 24 hours. 2). Support flight height: ≥ 50m/100m/150m (cable length has 55m, 110m and 160m). 3). Optional lighting: 640W or 1280W. |
| Items | Technical parameters | ||
| Model | TPS110M-M350 Ver. 2.0 | TPS160M-M350 Ver. 2.0 | |
| Cable length | 110M | 160M | |
| Ambient temperature | -20~45ºC (working),-40~65ºC (storage) | ||
| Relative humidity | 10~80%RH (working),5~90%RH (storage) | ||
| Altitude | ≤3000m | ||
| Ground power module | Input voltage | 190~240Vac wide range input, single-phase 220Vac,frequency 50/60Hz | |
| Output voltage | 600~800Vdc adjustable,Factory Default 700Vdc | ||
| Output power | ≥3500W (Rated Long-Time Output),≥4000W (peak value≮30s) | ||
| Take-up and payoff speed | 0~2m/s, adjustable | ||
| take-up and payoff tension | 0~15N, adjustable | ||
| Interface | Input aerial plug, cable output XT60 connector, fiber optic FC port (optional) | ||
| Button and switch | AC Switches, high voltage on/off buttons, cable forced reel in buttons, backup battery switch for reel in cable | ||
| Protection level | IPx4 | ||
| Size | D450×W360×H280±0.5mm, excluding foot pads and external accessories | ||
| Weight | 17.5±0.5kg, excluding tethered cable | ||
| Cable | Material | Alloy lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer | |
| Fiber optic communication | The tethered cable is an optoelectronic composite cable containing tightly wrapped single-mode fiber with optional fiber optic communication. | ||
| Current | 5~7A | ||
| DC resistance | 6.8±0.2Ω, 100m@20ºCloop | ||
| Resistance Tensile strength | ≥100kg, resistant to repeated reaction and release times≥1000 | ||
| Insulation strength | ≥3500Vdc, 1min, no breakdown | ||
| Cable length | standard equipment 110m, optional 160m; Fiber optic with FC connector (optional). |
||
| Outer diameter | 3.4±0.1mm | ||
| Weight | 11±1g/m | ||
| Air module | Input voltage | 580~810Vdc wide range input | |
| Output voltage | 51.5 ± 0.5Vdc, constant voltage output | ||
| Output power | 3000W (rated long-term output), 3500W (peak value ≤ 10s) | ||
| Protection function | Input overvoltage and undervoltage protection Output overvoltage, overcurrent, short circuit, and over temperature protection |
||
| Isolation voltage | 3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | ||
| Installation method | Replacement battery latch, docking battery, side mounting | ||
| Heat dissipation method | External fan for active cooling, reserved air ducts for forced air cooling | ||
| Interface | Input XT60, output battery interface (powered by drones), output XT60 (powered by lighting) | ||
| Protection level | IP54 | ||
| Size | 158 × 92 × 115 ± 0.5mm | ||
| Weight | 960 ± 10g | ||
| Packing | Size | 550×460×400±5mm (Carton Size) | |
| Weight | 25.0±0.5kg, including ground power module, air module, Annexes and documents | ||
The tethered UAV can be applied in situations and environments that require long-time operation, making up for the shortcomings of short endurance time, faster power consumption with more mounts, and the need for frequent battery replacement. It expands the industry application of UAV.These products are used and deployed by armed forces, law enforcement, civil security, and private security in over 20 countries for event protection, perimeter surveillance, border protection, radio communications, long-duration health monitoring, emergency communication, traffic management, environment inspections, scientific research and many more.
Our Mission:
Provide best quality, fastest service and most professional tether solution for drone users.
Our Vision:
Be the leading manufacturer of drone tether station.
Our Advantage:
Our products are qualified by CNAS and other third party testing, and also got the CE certificate from UDEM(LVD+EMC).
| Q1: Do you support OEM/ODM? A1: Yes. We can print your logo on the product. Q2: About samples. A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged. Q3: What is the delivery time? A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution. Q4: What is the minimum order quantity? A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM. Q5: Can you reduce the shipping cost? A5: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice. If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely. |
){kind=link}