| Customization: | Available |
|---|---|
| Ground Module Input Voltage: | 190 to 240V |
| Ground Module Onput Voltage: | 600~800V |
|
Still deciding? Get samples of US$ 14958/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Uav Lighting 6000W 24h 160m 220m Drone Tether Power System for Disaster Site Rescue
How 6000w Tethered Drone Power Station to work for lighting
The tethered power system consists of ground module, cable, and air module which are transmitted through cables to provide continuous power to the UAV.
Lighting Disaster Site Rescue
II,Adapted drone
1.Supporting flight altitude:≥100/200m(tethered cable length 110/220m,Reserve safe length.)
2.Supporting takeoff weight:20~30kg(UAV force effect varies, this data is for reference only.)
3.Supporting flight duration:≥48h(The system can support working hours depending on the structure of the UAV and the electrical fatigue resistance.)
III,Function characteristics
| items | Technical parameters | ||
| Model | TPS110M-6K | TPS220M-6K | |
| Cable length | 110M | 220M | |
| Ambient temperature | -20~45ºC(working),-40~65ºC(storage) | ||
| Relative humidity | 10~80%RH(working),5~90%RH(storage) | ||
| Altitude | ≤3000m | ||
| Ground power module | Input voltage | 190~240Vac wide range input,single-phase 220Vac,frequency 50/60Hz | |
| Output voltage | 600~800Vdc adjustable,Factory Default 800Vdc | ||
| Output power | ≥7000W(Rated Long-Time Output),≥8000W(peak value≮30s) | ||
| take-up and payoff speed | 0~2m/s,adjustable | ||
| take-up and payoff tensile | 0~15N,adjustable | ||
| interface | Input aerial plug, bollard output XT60 connector, fiber optic FC port (optional) | ||
| Button and switch | AC Switches, high voltage on/off buttons, cable take-up buttons, power backup switches | ||
| Protection level | IPx4 | ||
| Size | D450×W360×H280±0.5mm,excluding foot pads and external accessories | ||
| Weight | 17.5±0.5kg,excluding tethered cable | ||
| Tethered cable | Material | Silver-plated lightweight high-temperature resistant aircraft wire, composite fluoroplastic insulation, high-modulus tensile aerospace-grade fiber braid | |
| Fiber optic communication | The tethered cable is an optoelectronic composite cable containing tightly wrapped single-mode fiber with optional fiber optic communication. | ||
| Current | 7~10A | ||
| DC resistance | 4.6±0.2Ω,100m@20ºCloop | ||
| Resistance Tensile strength | ≥150kg,resistant to repeated reaction and release times≥1000 | ||
| Insulation strength | ≥3500Vdc,1min, no breakdown | ||
| Cable length | standard equipment 110m,optional 220m | ||
| Outer diameter | 3.5±0.1mm | ||
| Weight | 21±1g/m | ||
| Air module | Input voltage | 580~810Vdc wide range input | |
| Output voltage | 50Vdc±1% or 58Vdc±1%,constant voltage output,support voltage customization | ||
| Output power | ≥6000W(rated long-term output),≥7000W(peak value≮10s) | ||
| Protection function | Input over voltage,under voltage protection,output over voltage,over current,short circuit,and over temperature protection | ||
| Communication function | Optional CAN communication to report voltage, current, temperature data and operating status information. | ||
| Isolation voltage | ≥3000V(Vin-Vout),1min,Current leakage 5mA,no breakdown,flying arc and corona phenomena | ||
| Installation method | Pre-mounted lugs, screwed in | ||
| Heat dissipation | External fan for active cooling, reserved air ducts for forced air cooling | ||
| Interface | Input XT60,output XT90×3 | ||
| Protection level | IP54 | ||
| Size | 200×150×68±0.5mm,excluding connector | ||
| Weight | 2.2±0.1kg,excluding outer connector and wire | ||
| packages | Size | wheeled suitcase:720×500×420±5mm(Wheels not included) | |
| Weight | 48±2kg,Storage of ground power module, air module, trailer (optional), Annexes and documents | ||
Our revolutionary drone tether has the following features:
Smaller Size
Lighter Weight
Simpler Operation Raliablity Stability
Automatic Cable Management
Constant Voltage Output
Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.
We have drone tether station of Dji drone,
01.DJI Mavic 3 Tethered Power System..
02.DJI M30 Tethered Power System.
03.DJI M350 Tethered Power System
04.DJI Flycart30 Tether power system
Whatever you are drone manufacturer and drone service provider,we can customize it for your drones,it can make your drone to work for longer time.
06.600W Universal Tethered Power System
07.2000W Universal Tethered Power System
08.3000W Universal Tethered Power System Ver. 2.0
09.3000W Universal Tethering Power Station Ver. 1.0
10.6000W Universal Tethered Power System
11.12000W Universal Tethered Power Supply System
12.18000W Universal Tethered Power Supply System
Tethered Drone Lighting System
13.640W Matrix Lighting
14.1280W Matrix Lighting
Q4: Do you support OEM/ODM?
A4: Yes. We can print your logo on the product.
Q5: What is the delivery time?
A5: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q6: What is the minimum order quantity?
A6: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
){kind=link}