| Customization: | Available |
|---|---|
| Support Takeoff Weight: | 40-60kg |
| Support Flight Duration: | ≥ 24h |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1). Easy to operate, no need to operate tethering box during UAV flight. 2). Comprehensive input and output protection function, fault elimination and self recovery. 3). The on-board power supply has output at constant voltage, and the backup battery remains fully charged throughout the entire process without any power loss. |
2. Adaptive drone
| 1). Support flight altitude: 100m/200m/300m (tethered cable 110m/220m/330m, reserved safety length). 2). Support takeoff weight: 40-60kg (drone power efficiency varies, this data is for reference only). 3). Support flight duration: ≥ 24h (the system can support working duration, which depends on the structure and electrical fatigue resistance of the drone). |
| 1). Safety protection: Strong and weak current separation design, with input undervoltage, input overvoltage. Output overvoltage, output overcurrent, output short circuit, and output overheating protection functions. The input and output withstand voltage is ≥ 3000VDC, and the cable insulation layer withstand voltage is ≥ 3500VDC. 2). Data communication: Wired and wireless communication functions, remote display and control, data viewing and downloading; fiber optic communication optional. 3). Data display: The touch screen displays data and status of output voltage, output current, output power, cable reel out length, operating time, equipment temperature, total power consumption, and fault records. 4). Setting and adjustment: Support the setting and adjustment of parameters such as tension and speed for reel in&out cable, date and time, output voltage, safety meters, alarm temperature, etc. and support Chinese and English. 5). Alarm and reminder: When a fault occurs, the screen displays the fault content, and the buzzer sounds a reminder. 6). Carrying and Transportation: The box is equipped with handles and foot pads, and can be optionally equipped with a pallet components and a pull rod roller for carrying and transportation. 7). Automated winch reel: Synchronously retracting and releasing cables following the takeoff and landing of the drone, automatic adjusting the tension, and backup battery to activate cable reel in function in case of power cut off. 8). Power supply 17000W/50L diesel generators is recommended. |
| Items | Technical parameters | |||
| Model | TPS110M-12KW Ver. 2.0 |
TPS220M-12KW Ver. 2.0 |
TPS330M-12KW Ver. 2.0 | |
| Cable length | 110M | 220M | 330M | |
| Ambient temperature | -20~45 ºC (working), -40~65 ºC (storage) | |||
| Relative humidity | 10-80% RH (working), 5-90% RH (storage) | |||
| Altitude | ≤ 3000m | |||
| Tethering power module | Input voltage | 380Vac wide range input, three-phase five wire system 380Vac @50/60Hz | ||
| Output voltage | 600~800Vdc adjustable, factory default 800Vdc | |||
| Output power | 15000W (rated long-term output), 20000W (peak value ≤ 30s) | |||
| Storage cable length | Standard storage cable 110m, 220m and 330m are optional | |||
| Retraction speed | 0-3m/s, adjustable | |||
| Reel in/out tension | 0-20N, adjustable | |||
| Interface | Input aviation socket, fiber optic FC port (optional), communication Type-C port, cable output LP20 aviation connector | |||
| Buttons and switches | High-voltage on/off button, cable forced retraction button, AC switch, backup battery switch for reel in cable | |||
| Size | 600 ×570 × 460 ± 0.5mm, excluding foot pads | |||
| Weight | 54.0 ± 0.5kg, not including tethered cable weight | |||
| Cable | Material | Alloy lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer | ||
| Fiber optic (optional) |
The tethered cable is an optoelectronic composite cable, which contains tightly packed single-mode fiber optic and can be optionally equipped with fiber optic communication | |||
| Current | 15-20A | |||
| DC resistance | 2.3 ± 0.1 Ω, 100m@20 ºC loop | |||
| Tensile strength | ≥ 200kg, resistant to repeated retraction and release ≥ 1000 times | |||
| Insulation strength | ≥ 3500Vdc, no breakdown for 1 minute | |||
| Cable length | Standard storage cable 110m, 220m and 330m are optional; fiber optic with FC port (optional). | |||
| Outer diameter | 5.0 ± 0.2mm | |||
| Weight | 29g±1g/meter | |||
| Air module | Input voltage | 580~810Vdc wide range input | ||
| Output voltage | 50 ± 0.5Vdc, constant voltage output, supporting voltage customization | |||
| Output power | 12000W (rated long-term output), 15000W (peak value ≤ 10s) | |||
| Protection function | Input overvoltage and undervoltage protection Output overvoltage, overcurrent, short circuit, and over temperature protection |
|||
| Isolation voltage | 3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | |||
| Installation method | Reserve installation holes and fix them with screws. | |||
| Heat dissipation method | External fan active heat dissipation, reserved air duct forced air cooling | |||
| Interface | Input LP20 aviation connector, output XT90 * 6 | |||
| Protection level | IP54 | |||
| Size | 302 × 200× 68 ± 0.5mm, excluding mounting lugs | |||
| Weight | 4200 ± 100g, excluding external connectors | |||
| Packing | Size | 850×740×600±5mm (Wooden Size) | ||
| Weight | 80.0±0.5kg, including ground power module, air module, Annexes and documents | |||
The tethered UAV can be applied in situations and environments that require long-time operation, making up for the shortcomings of short endurance time, faster power consumption with more mounts, and the need for frequent battery replacement. It expands the industry application of UAV.These products are used and deployed by armed forces, law enforcement, civil security, and private security in over 20 countries for event protection, perimeter surveillance, border protection, radio communications, long-duration health monitoring, emergency communication, traffic management, environment inspections, scientific research and many more.
Our Mission:
Provide best quality, fastest service and most professional tether solution for drone users.
Our Vision:
Be the leading manufacturer of drone tether station.
1.DJI Mavic 3 Tethered Power System
2.DJI M30 Tethered Power System
3.DJI M350 Tethered Power System V2
4.DJI M350 Tethered Power System V1
5.DJI Flycart30 Tether power system
6.600W Universal Tethered Power System
7.2000W Universal Tethered Power System
8.3000W Universal Tethered Power System V3
9.3000W Universal Tethered Power Station V2
10.3000W Universal Tethering Power Station V1
11.6000W Universal Tethered Power System
12.12000W Universal Tethered Power Supply System
13.18000W Universal Tethered Power Supply System
Our products are qualified by CNAS and other third party testing, and also got the CE certificate from UDEM(LVD+EMC).
Q1: Do you support OEM/ODM?
A1: Yes. We can print your logo on the product.
Q2: About samples.
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
Q3: What is the delivery time?
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity?
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost?
A5: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.
If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.
){kind=link}