Powerful and Portable TPS33m-M3 Power Tether for The M3

• Customization: Available
• Tethered Power System: Tethering Power Station
• Output Power: 600W-800W
• Model NO.: 4. TPS33M-M3
• Work Temperature: -20 to 55 Degrees Celsius
• Cable Winding Type: Manual Button to Wind Cable Auto
• Hovering Time: 12 Hours
• Input Voltage: 110-220V
• Cable Length: 33m or Customized
• Transport Package: Carton Case
• Specification: W130*D250*H180
• Trademark: Rosefinch
• Origin: Nanjing, China
• HS Code: 8504401500
• Production Capacity: 5000/Year

Product Description

Powerful and Portable TPS33M-M3 Power Tether for the M3

 

Rosefinch provides a robust, easy-to-use power tether system for DJI's M3,M300, M35, Inspire tether drone, and most other commercial drones. No more wasting time and manpower on frequent battery replacement. When connected to a tether, your drone is enabled for unlimited hover and continuous operation of your payload.

Unlimited Power
Uninterrupted Missions
Unlimited Flight Time.
No more interrupted missions while changing batteries.


Drone Tethered Power System can be customized according to your special needs.

The cable length can be customized from 33-330m long. 
The optic fiber cable is available. 
The system is compatible for all multi rotor drones with MTOW 5-110kg.


Drone Tethered Power System for DJI M3 Drone TPS33M-M3
 

1. Typical characteristics 

1) . It is small in size and light in weight, with a tethered box weighing only 3.6kg.It is easy to carry with a backpack for storage.
2) . Replace the Primary battery, without changing any structure of the UAV,and seamlessly switch between tethering or releasing.
3) . The operation is simple, and the entire process of drone takeoff and landing does not require the operation of the mooring box.
The button type take-up function is also available.
4) . The onboard power supply has a constant voltage output,and the backup battery has no charging or discharging phenomenon
throughout the entire process, without losing power or causing hidden damage.

 

2. Adapted to DJI M3 drone

1). Support flight duration: ≥ 12h.
2). Support flight altitude: ≥ 30m (tied cable 33m, reserved safety length).
3). Optional lighting group: 200W (JM200).

 

3. Functional characteristics

1). Wire winding function: Passive wire reel out, long press the button to automatically reel
in cable, and manually winding in case of power loss.
2). Protection function: Input overvoltage and undervoltage protection, output overvoltage,
overcurrent, short circuit, over temperature protection, fault elimination and self recovery.
3). Fault alarm function: The system fault alarm light flashes red and beeps to alert.
4). System equipment portability: With a backpack design, the backpack can be equipped
with a complete tethering system that includes a tethering box, onboard power supply,
lighting unit (optional), and other accessories. The overall weight is 5.0 ± 0.2kg.
 

 Environmental characteristics
1) Environmental temperature: -20~45 ºC (working), -40~65 ºC (storage).
2) Relative humidity: 10-80% RH (working), 5-90% RH (storage).
3) Altitude: 0-3000m.

Air module power supply
1) Input voltage: 330-430Vdc wide range input.
2) Output voltage: 17.2 ± 0.2Vdc, constant voltage output.
3) Output power: 600W (rated long-term output), 800W (peak value≤10s).
4) Protection function: Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection.
5) Installation method: Tool free snap on installation.
6) Heat dissipation method: Passive heat dissipation, natural air cooling of the heat dissipation teeth.
7) Interface: Input locking aviation socket, output XT30.
8) Size: 115 × 59 × 35 ± 0.5mm, excluding mounting brackets.
9) Weight: 300 ± 10g, excluding external connectors.
10) Protection level: IP54.

Tether cable
1) Material: Silver plated lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer.
2) Current: 1.5-2A.
3) DC resistance: 26 ± 0.2 Ω, 100m loop @ 20 ºC,
4) Tensile strength: ≥ 50kg, resistant to repeated retraction and release times ≥ 500 times.
5) Isolation voltage: ≥ 3000Vdc, no breakdown after 1 minute.
6) Cable length: 33 ± 2m, supporting customized cable length.
7) Outer diameter: 2.2 ± 0.1mm.
8) Weight: 0.65 ± 0.05kg/100m.
 

Types of Drone Tethers
There are numerous varieties of drone tethers available, each with special advantages and drawbacks.
A cable tether is the most typical kind of drone tether. Cable tethers are portable, strong, and simple to set up. They give the drone a safe connection to the platform or stationary object, and they are simple to adjust to give the drone the desired range of motion.
A wireless tether is another kind of drone tether. Although there is no requirement for a direct physical connection between the drone and the stationary object or platform, wireless tethers offer the same advantages as cable tethers. Although they are typically more expensive than cable tethers, they offer more convenience and flexibility.
 

Tether ground box
1) Input voltage: 176-264Vac wide range input, single-phase 220Vac @ 45-65Hz.
2) Output voltage: 300~420Vdc adjustable, factory default 400Vdc.
3) Output power: 800W (rated long-term output), 1000W (peak value≤30s).
4) Storage cable length: Standard storage cable 33m, supporting maximum storage cable ≥ 55m.
5) Cable reel in and out function function: Passive cable reel out, long press the button to automatically reel in, and manually winding in case of power loss.
6) Protection function: Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection.
7) Fault alarm function: The fault alarm light flashes red and beeps for alarm prompt.
8) Interface: Input socket with switch, cable output locking aviation socket.
9) Buttons: High-voltage on/off button, cable reel in forced button, alarm lamp
10) Size: 280 × 150 × 185 ± 0.5mm, excluding foot pads and handles.
11) Weight: 4.2 ± 0.1kg, including 33m tether cable.
12) Protection level: IPx4.
13) System equipment carrying: backpack design, the backpack can be equipped with a complete set of tethering system including a tether ground box, air module power supply, lighting unit, and other accessories, with an overall weight of 5.0 ± 0.2kg.

Parameters for item targets
1. Input voltage of tether ground box: 176-264Vac wide range input, single-phase 220Vac.
2.  Air module power supply output voltage: 17.2 ± 0.2Vdc constant voltage output. The UAV operates under the tethered power supply condition, and the backup battery remains fully charged throughout the entire process without any power loss.
3. Equipment output power: Air module power supply ≥ 600W, tether ground box ≥ 800W.
4. Air module power supply size: ≤ 115 × 59 × 35mm.
5. Air module power supply weight: ≤ 310g.
6.  Size of tether ground box: ≤ 265 × 175 × 150mm.
7.  Weight of tether ground box: ≤ 4.3kg, which includes 33m tether cables.
8.  Cable size and weight: length ≥ 33m, cable diameter ≤ 2.3mm, weight ≤ 0.7kg/100m.
9. Cable reel in and out function function: Passive cable reel out, long press the button to automatically reel in, and manually winding in case of power loss.
10.  Overcurrent protection function: When the air module power supply outputs overcurrent, it provides constant current step-down protection. The output should not be directly turned off and can be self restored.
11. Fault alarm function: When the system malfunctions, the fault alarm light flashes red and beeps to alert.
12.  System equipment protection level: air module power supply ≥ IP54, tether ground box ≥ IPx4.
13.  System equipment carrying: backpack design, the backpack can be equipped with a complete set of tethering system including a tether ground box, air module power supply, lighting unit, and other accessories, with an overall weight of 5.0 ± 0.2kg.
 

 

 

 

For drone tethered power system,you can choose several types from below form:
 

1.TPS33M-M3 Tethered Power System
2. TPS110M-M30 Tethered Power System
3. TPS110M-M300/M350 Tethered Power System New Version
4. TPS110M-M300/M350 Tethered Power system
5. TPS33-600W Universal Tethered Power System
6. TPS110-2000W Universal Tethered Power System
7. TPS160M-3000W Universal Tethered Power System New Version
8. TPS160M-3000W Universal Tethered Power System
9. TPS220M-3000W Universal Tethered Power System
10. TPS220M-6000W Universal Tethered Power System
11. TPS330M-12000W Universal Tethered Power System

Main Applications of Drone Tethered Power System

-Day and night missions
-Radio relay
-Crisis management
-Site protection
-Traffic surveillance
-Large-scale events security
-Forest surveillance
-Industry monitoring
-Air-quality monitoring
 

Important safety notice of Drone Tethered Power System

1. More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual
2. The operator should receive professional training and examination, untrained personnel do not handle this product
3. Don't be drunk, poor state of fatigue, sick when handling this product
4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger
5. Please fly under the safe take-off weight, in case of any risks.
6. Please not fly under strong electromagnetism interference circumstance
7. Please follow the local laws and regulations and not fly in no-fly zone
8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers.
9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V
10. The battery long time no use, please store it in ventilated dry place with 60% electricity

 

Our service
Our Main Solutions
1. Mapping, surveying and 3D modeling
2. Surveillance
3. Inspection
4. Delivery
5. Customization according to application and client's requirements

 

Company Information
 

The "Drone Tethered Power System" - Rosefinch Technology is the leading manufacturer of drone tethering power station.Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.The system is compatible for all multi rotor drones.
 

 

 

 

FAQ

Q1: Do you support OEM/ODM? 
A1: Yes. We can print your logo on the product.
 Q2: About samples. 
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
 Q3: What is the delivery time? 
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity? 
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost? 
A6: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.


If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.