Customization: | Available |
---|---|
Ground Module Input Voltage: | 380V |
Ground Module Onput Voltage: | 600~800V |
Still deciding? Get samples of US$ 29194/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
12KW Drone Accessories Tethered Power System
The 12KW tethered power system completely solves the bottleneck of short battery life of traditional UAVs through stable ground power supply, enabling the UAV to achieve almost uninterrupted continuous flight. The system integrates lightweight cables, a high-efficiency generator and intelligent power management software to ensure safe and secure power transmission, while reducing power loss and improving overall operational efficiency.
II,Adapted drone
1). Support flight altitude: 100m/200m/300m (tethered cable 110m/220m/330m, reserved safety length).
2). Support takeoff weight: 40-60kg (drone power efficiency varies, this data is for reference only).
3). Support flight duration: ≥ 48h (the system can support working duration, which depends on the structure and electrical fatigue resistance of the drone).
III,Function characteristics
Items | Technical parameters | |||
Model | TPS110M-12KW Ver. 2.0 |
TPS220M-12KW Ver. 2.0 |
TPS330M-12KW Ver. 2.0 | |
Cable length | 110M | 220M | 330M | |
Ambient temperature | -20~45 ºC (working), -40~65 ºC (storage) | |||
Relative humidity | 10-80% RH (working), 5-90% RH (storage) | |||
Altitude | ≤ 3000m | |||
Tethering power module | Input voltage | 380Vac wide range input, three-phase five wire system 380Vac @50/60Hz | ||
Output voltage | 600~800Vdc adjustable, factory default 800Vdc | |||
Output power | 15000W (rated long-term output), 20000W (peak value ≤ 30s) | |||
Storage cable length | Standard storage cable 110m, 220m and 330m are optional | |||
Retraction speed | 0-3m/s, adjustable | |||
Reel in/out tension | 0-20N, adjustable | |||
Interface | Input aviation socket, fiber optic FC port (optional), communication Type-C port, cable output LP20 aviation connector | |||
Buttons and switches | High-voltage on/off button, cable forced retraction button, input air switch, backup power switch | |||
Size | 600 ×570 × 460 ± 0.5mm, excluding foot pads | |||
Weight | 54.0 ± 0.5kg, not including tethered cable weight | |||
Tether cable | Material | Alloy lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer | ||
Fiber optic (optional) |
The tethered cable is an optoelectronic composite cable, which contains tightly packed single-mode fiber optic and can be optionally equipped with fiber optic communication | |||
Current | 15-20A | |||
DC resistance | 2.3 ± 0.1 Ω, 100m@20 ºC loop | |||
Tensile strength | ≥ 200kg, resistant to repeated retraction and release ≥ 1000 times | |||
Insulation strength | ≥ 3500Vdc, no breakdown for 1 minute | |||
Cable length | Standard storage cable 110m, 220m and 330m are optional; fiber optic with FC port (optional). | |||
Outer diameter | 5.0 ± 0.2mm | |||
Weight | 29g±1g/meter | |||
Air module | Input voltage | 580~810Vdc wide range input | ||
Output voltage | 50 ± 0.5Vdc, constant voltage output, supporting voltage customization | |||
Output power | 12000W (rated long-term output), 15000W (peak value ≤ 10s) | |||
Protection function | Input overvoltage and undervoltage protection Output overvoltage, overcurrent, short circuit, and over temperature protection |
|||
Isolation voltage | 3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | |||
Installation method | Reserved installation ears, fixed with screws | |||
Heat dissipation method | External fan active heat dissipation, reserved air duct forced air cooling | |||
Interface | Input LP20 aviation connector, output XT90 * 6 | |||
Protection level | IP54 | |||
Size | 302 × 200× 68 ± 0.5mm, excluding mounting lugs | |||
Weight | 4200 ± 100g, excluding external connectors | |||
Packing | Size | 850×740×600±5mm (Carton Size) | ||
Weight | 80.0±0.5kg, including ground power module, air module, Annexes and documents |
Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.
The system is compatible for all multi rotor drones with MTOW 3-110kg.
Q1: Do you support OEM/ODM?