Cleaning Drone Tethered Drone Power Module for Dji Flycart30

• Customization: Available
• Ground Module Input Voltage: 380 ± 10% VAC
• Ground Module Onput Voltage: 600-800VDC
• Model NO.: TPS110M-FC30
• Ground Module Output Power: 22000W
• Ground Module Protection Level: Ipx4
• Cable Length: Standard 220m, Optional 110m/330m
• Gross Weight: 93.5±0.5kg
• Air Module Intput Voltage: 580~810V
• Air Module Output Voltage: 59VDC ± 1%
• Air Module Output Power: 18000W
• Air Module Protection Level: IP54
• Tethered Drone System: Dji Flycart30 Drone Tethered Station
• Transport Package: Aviation Hard Case
• Specification: 900× 730× 700mm
• Trademark: Rosefinch
• Origin: China
• HS Code: 8504401990
• Production Capacity: 1000/Year

Product Description

Cleaning Drone Tethered Drone Power Module For DJI Flycart30 
 

1.The Cleaning Drone Tethered Drone Power Module is an innovative solution for powering and guiding drones in prolonged cleaning operations. This module supplies continuous electricity via a tether, eliminating battery limitations and enabling extended flight times for efficient maintenance and cleaning tasks at heights or over large areas.

2.How to Integrate Tethered Drones for Cleaning Use

In the case of DJI Drones, for example, the integration of a tethering system for a DJI UAV to become a cleaning UAV (i.e., a drone used for cleaning tasks) involves several aspects of design and considerations. Some of the possible steps and technical considerations are outlined here:

1.Selection of a suitable DJI platform:
First, one needs to select a DJI drone that is suitable for integrating a tethered system. Typically, large and scalable models such as the M300 RTK in the Matrice series are more suitable for this type of application.
2.Customized development:
Customized development through the DJI SDK (Software Development Kit) may be required to be able to control specific cleaning equipment on board the drone. This includes programming to automate flight paths, operate cleaning tools, etc.
3.Integrate a tethering system:
A tethering system provides continuous power to the drone and may allow for data transfer. For cleaning drones, this means that long missions can be performed without worrying about battery life. It is important to select or develop a suitable tethering solution to ensure that it is lightweight, has a stable power supply and does not affect the drone's flight performance.
4.Installation of cleaning equipment:
Depending on the specific cleaning needs, different cleaning devices can be selected. For example, if the aim is to clean the exterior of a building, a high-pressure water gun or brush might be used; if the aim is to clean dust from an elevated area, a vacuum cleaner or other form of collection device might be required. These devices need to be adapted and mounted on the drone with overall balance and safety.

 

I,Typical Characteristic
1). Easy to operate, no need to operate during UAV flight.
2). Comprehensive input and output protection function, fault elimination and self recovery.
Fully automatic cable reel in/out function, and backup battery to activate cable reel in function in case of power cut off.
3). The air module power supply has a constant voltage output, and the backup battery has no charging or discharging or power loss phenomena.
4). The air module power supply is in stead of a original drone battery without any structural changes to the drone.
 

II,Adapted FC30 drone
1). Support flight duration: ≥ 12h
2). Support flight altitude: ≥100m/200m/300m, (tethered cable 110m/220m/330m, reserved safety length).

III,Function characteristics
1). Safety protection: Strong and weak current separation design, with input undervoltage, input overvoltage. Output overvoltage, output overcurrent, output short circuit, and output overheating protection functions. The input and output withstand voltage is ≥ 3000VDC, and the cable insulation layer withstand voltage is ≥ 3500VDC.
2). Data communication: Wired and wireless communication functions, remote display and control, data viewing and downloading; fiber optic communication optional.
3). Data display: The touch screen displays data and status of output voltage, output current, output power, cable reel out length, operating time, equipment temperature, total power consumption, and fault records.
4). Setting and adjustment: Support the setting and adjustment of parameters such as tension and speed for reel in&out cable, date and time, output voltage, safety meters, alarm temperature, etc. and support Chinese and English.
5). Alarm and reminder: When a fault occurs, the screen displays the fault content, and the buzzer sounds a reminder.
6). Carrying and Transportation: The box is equipped with handles and foot pads, and can be optionally equipped with a pallet components and a pull rod roller for carrying and transportation.
7). Automated winch reel: synchronously retracting and releasing cables following the takeoff and landing of the drone, automatic adjusting the tension, and backup battery to activate cable reel in function in case of power cut off.
8). 25000W/100L diesel generators is recommended.


IV,Parameters

Items		Technical parameters
Model		TPS110M-Flycart30	TPS220M-Flycart30	TPS330M-Flycart30
Cable length		110M	220M	330M
Ambient temperature		-20~45 ºC (working), -40~65 ºC (storage)
Relative humidity		10-80% RH (working), 5-90% RH (storage)
Altitude		≤ 3000m
Tethering power module	Input voltage	380 ± 10% VAC, three-phase five wires, frequency 50Hz
	Output voltage	600-800Vdc adjustable, factory default 800Vdc
	Output power	22000W (rated long-term output), ≥ 25000W (peak value ≤ 30s)
	Reel in/out speed	0-3m/s, adjustable
	Reel in/out tension	0-20N, adjustable
	Interface	Input aviation plug, cable output LP20 aviation plug, fiber optic FC port (optional)
	Buttons and switches	AC switch, high-voltage on/off button, cable forced take-up button, backup battery switch for reel in cable
	Protection	IPx4
	Size	600×570×460±0.5mm, excluding foot pads and external accessories
	Weight	54±0.5kg, excluding tethered cables
Cable	Material	Alloy lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer
	Optical Fiber (optional)	Tethered cable is an optoelectronic composite cable, contains tightly wrapped single-mode fiber and can be optionally equipped with fiber optic communication
	Current	25~30A
	DC resistance	1.6 ± 0.1 Ω, 100m@20 ºC loop
	Tensile strength	≥ 300kg, resistant to repeated retraction and release times ≥ 1000
	Insulation strength	≥ 3500Vdc, no breakdown for 1 minute
	Cable length	Standard 220m, optional 110m/330m
	Outer diameter	6.3±0.1mm
	Weight	44±1g/m
Air module	Input voltage	580-810Vdc wide range input
	Output voltage	59Vdc ± 1%, constant stable output
	Output power	18000W (rated long-term output), ≥ 22000W (peak value ≥ 10s)
	Protection function	Input overvoltage and undervoltage protection Output overvoltage, overcurrent, short circuit, and over temperature protection
	Isolation voltage	≥ 3000V (Vin Vout), 1min, leakage current 5mA, no breakdown, flashover, or corona phenomenon
	Installation method	Replace a drone battery and install it directly by plugging and unplugging it
	Heat dissipation method	Built in fan for active cooling, reserved air duct for forced air cooling
	Interface	Input LP20 aviation plug, output XT90
	Protection	IP54
	Size	468 × 308 × 142 ± 0.5mm, excluding handles and connectors
	Weight	10.8 ± 0.2kg (replace one 11.5kg drone battery)
Packing	Size	900×730×700±5mm (Aviation hard case size)
	Weight	93.5±0.5kg	98.5±0.5kg	103.5±0.5kg

1,Unless otherwise specified,All of the above data are in Ta=25ºC,humidity<75%,nominal Input and rated Load.
2,Due to space limitations,there is incomplete data in the sheet.please contact our sales personnel to obtain it.

Application Demonstration

-Day and night missions
-Radio relay
-Crisis management
-Site protection
-Traffic surveillance
-Large-scale events security
-Forest surveillance
-Industry monitoring
-Air-quality monitoring
 

Products List

DJI Mavic 3 Tethered Power System

DJI M30 Tethered Power System

DJI M350 Tethered Power System V2

DJI M350 Tethered Power System V1

DJI Flycart30 Tether power system

600W Universal Tethered Power System

2000W Universal Tethered Power System

3000W Universal Tethered Power System V3

3000W Universal Tethered Power Station V2

3000W Universal Tethering Power Station V1

6000W Universal Tethered Power System

12000W Universal Tethered Power Supply System

18000W Universal Tethered Power Supply System

Certifications

Company Profile

Rosefinch Technology specializes in the research, production of drone tether power system and related system products for many years. 

Do you need tether power system for drones?we can customized it for your drones,  Whatever you are drone manufacturer and drone service provider,It can make your drone to work for longer time in future.

Q&A

Q1: What is a tethered power supply for drones?
A1: The tethered power system consists of ground module, cable, and air module which are transmitted through cables to provide continuous power to the UAV. 

Q2: Is the tethered power supply suitable for all types of drones?
A2: While our tethered power supply is compatible with a wide range of drones, it is specifically designed to work best with drones that are equipped to handle the weight and drag of the tether. We recommend checking the specifications of both the drone and the power supply to ensure compatibility. Our technical support team is available to assist with any integration questions. 

Q3: What are the main applications of a tethered power supply?
A3: Tethered power supplies are ideal for applications that require prolonged aerial presence, such as:
Surveillance and Security
Communication Relay
Live Streaming
Inspection and Monitoring

Q4: Do you support OEM/ODM? 
A4: Yes. We can print your logo on the product. 

Q5: What is the delivery time? 
A5: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution. 

Q6: What is the minimum order quantity? 
A6: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.