| Customization: | Available |
|---|---|
| Ground Power Module Input Voltage: | 190-240V |
| Ground Power Module Output Voltage: | 600-800V |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Typical characteristics
| 1). Small in size, light weight, backpack storage, easy to carry, with a tethered box weighing only 8.5kg. 2). Air module power supply 570g< single TB30 battery 685g, safe replacement and non-destructive mounting. 3). Replace a battery without changing any structure of the drone, and seamlessly switch between tethering mode or flying mode. 4). The operation is simple, and the entire process of unmanned aerial vehicle takeoff and landing doesn't require the operation of the tethering box, truly automatically reel in/out. 5). The air module power supply has a constant voltage output, and the backup battery has no charging or discharging phenomenon throughout the entire process, without losing power or causing hidden damage. |
2. Adapted to DJI M30
| 1). Support flight duration: ≥ 12 hours. 2). Support flight altitude: ≥ 50m/100m (standard tethered cable 55m, 110m is optional). 3). Optional lighting group: 640W. |
| Items | Technical parameters | ||
| Model | TPS55M-M30 | TPS110M-M30 | |
| Cable length | 55M | 110M | |
| Ambient temperature | -20~45ºC (working),-40~65ºC (storage) | ||
| Relative humidity | 10~80%RH (working),5~90%RH (storage) | ||
| Altitude | ≤3000m | ||
| Ground power module | Input voltage | 190-240Vac wide range input, single-phase 220Vac@50/60Hz | |
| Output voltage | 600~800Vdc adjustable, factory default 750Vdc | ||
| Output power | 3500W (rated long-term output), 4000W (peak value ≤ 30s) | ||
| Storage cable length | Standard tethered cable 55m; 110m is optional | ||
| Retraction speed | 0-2m/s, adjustable | ||
| Reel in and out tension | 0-10N, adjustable | ||
| Interface | Input socket with switch, type-C communication port, cable output XT60 connector | ||
| Buttons and switches | High-voltage on/off button, cable strong retraction button, backup battery switch, AC switch, backup battery switch for reel in cable | ||
| Protection level | IPx4 | ||
| Size | 360 ×180 ×260 ± 0.5mm, excluding foot pads and handles | ||
| Weight | 8.5 ± 0.2kg, not including weight of tethered cable | ||
| Cable | Material | Silver plated lightweight high-temperature resistant aviation wire, lightweight high-temperature resistant sheath | |
| Current | 3-5A | ||
| DC resistance | 10.5 ± 0.2 Ω, 100m@20 ºC loop | ||
| Tensile strength | ≥ 20kg, resistant to repeated reel in&out ≥ 500 times | ||
| Insulation strength | ≥ 3500Vdc, no breakdown for 1 minute | ||
| Cable length | Standard tethered cable 55m; 110m is optional | ||
| Outer diameter | 2.3 ± 0.1mm | ||
| Weight | 10g±0.5g/meter | ||
| Air module | Input voltage | 580~810Vdc wide range input | |
| Output voltage | 25.2 ± 0.3Vdc, constant voltage output | ||
| Output power | 2000W (rated long-term output), 2500W (peak value ≤ 10s) | ||
| Protection function | Input overvoltage and undervoltage protection Output overvoltage, overcurrent, short circuit, and over temperature protection |
||
| Isolation voltage | 3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | ||
| Installation method | Plug-in installation, the same as the original battery installation method, without any modifications to the drone and aviation box | ||
| Heat dissipation method | External fan active heat dissipation, reserved air duct forced air cooling | ||
| Interface | Input XT60, output battery interface (powered by drones), output XT60 (powered by lighting) | ||
| Protection level | IP54 | ||
| Size | 156 ×75 ×48 ± 0.5mm (replace one TB30 battery, smaller than battery size) | ||
| Weight | 570 ± 20g (replace a 685g TB30 battery to reduce the takeoff weight of the drone) | ||
| Packing | Size | 550×420×260±5mm (Backpack size) 600×450×300±5mm (Carton Size) |
|
| Weight | 14.5±0.5kg, including ground power module, air module, Annexes and documents | ||
-Day and night missions
-Radio relay
-Crisis management
-Site protection
-Traffic surveillance
-Large-scale events security
-Forest surveillance
-Industry monitoring
-Air-quality monitoring
1.Mapping, surveying and 3D modeling
2. Surveillance
3. Inspection
4. Delivery
5. Customization according to application and client's requirements
Our products are qualified by CNAS and other third party testing, and also got the CE certificate from UDEM(LVD+EMC).
For drone tethered power system,you can choose several types from below form:
1.DJI Mavic 3 Tethered Power System
2.DJI M30 Tethered Power System
3.DJI M350 Tethered Power System V2
4.DJI M350 Tethered Power System V1
5.DJI Flycart30 Tether power system
6.600W Universal Tethered Power System
7.2000W Universal Tethered Power System
8.3000W Universal Tethered Power System V3
9.3000W Universal Tethered Power Station V2
10.3000W Universal Tethering Power Station V1
11.6000W Universal Tethered Power System
12.12000W Universal Tethered Power Supply System
13.18000W Universal Tethered Power Supply System
| 1.More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual 2. The operator should receive professional training and examination, untrained personnel do not handle this product 3. Don't be drunk, poor state of fatigue, sick when handling this product 4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger 5. Please fly under the safe take-off weight, in case of any risks. 6. Please not fly under strong electromagnetism interference circumstance 7. Please follow the local laws and regulations and not fly in no-fly zone 8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers. 9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V 10. The battery long time no use, please store it in ventilated dry place with 60% electricity. |
){kind=link}