Flycart 330m Automatic Cable Reel in Tether Drone Power Station for Cleaning

• Customization: Available
• Cable Length: 200m
• Output Power: 19200W
• Model NO.: L400-FC30
• Work Temperature: -20~45 ºC (Working), -40~65 ºC (Storage)
• Cable Collection: Automatic Reel in and out
• Hovering Time: 24 Hours
• Input Voltage: 380 ± 10% VAC
• Weight: 54kg
• Transport Package: Wooden Case
• Specification: 600× 570× 460± 0.5mm
• Trademark: Rosefinch
• Origin: Nanjing, China
• Production Capacity: 1000/Year

Product Description

Flycart 330M Automatic Cable Reel in Tether Drone Power Station for Cleaning
     This tethered power system coupled with commercial drones can be applied in many different fields by loading different equipment, mainly used as mobile relay station, and to provide secure and reliable high altitude long time aerial monitoring and for emergency lighting.

Typical characteristics
Easy to operate, no need to operate during UAV flight.

Comprehensive input and output protection function, fault elimination and self recovery.

Fully automatic cable reel in/out function, allowing manual retract in case of ground power OFF.

The air module power supply has a constant voltage output, and the backup battery has no charging or discharging or power loss phenomena.

The air module power supply is in stead of a original drone battery without any structural changes to the drone.

Adaptive drone
Support flight duration: ≥ 24h

Support flight altitude: ≥200/300m, (tethered cable 200/300m, reserved safety length)

Optional task payloads: floodlights, spotlights, tweeters, aerial suspension systems, communication base stations

 

 

Parameters

Items		Technical parameters
Ambient temperature		-20~45 ºC (working), -40~65 ºC (storage)
Relative humidity		10-80% RH (working), 5-90% RH (storage)
Altitude		≤ 3000m
Tethering power module	Input voltage	380 ± 10% VAC, three-phase five wire system, frequency 50Hz
	Output power	≥ 25000W (rated long-term output), ≥ 30000W (peak value ≤ 30s)
	Retraction speed	0-3m/s, adjustable
	Reel in/out tension	0-20N, adjustable
	Interface	Input aviation plug, cable output LP20 aviation plug, fiber optic FC port (optional)
	Buttons and switches	AC switch, high-voltage on/off button, cable forced take-up button, backup power switch
	Protection	IPx4
	Size	600×570×460±0.5mm, excluding foot pads and external accessories
	Weight	54±0.5kg, excluding tethered cables
Air module	Input voltage	580-810Vdc wide range input
	Output voltage	59Vdc ± 1%, constant stable output, supports voltage customization
	Output power	≥ 19200W (rated long-term output), ≥ 23000W (peak value ≥ 10s)
	Protection function	Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection
	Isolation voltage	≥ 3000V (Vin Vout), 1min, leakage current 5mA, no breakdown, flashover, or corona phenomenon
	Installation method	Replace a drone battery and install it directly by plugging and unplugging it
	Heat dissipation method	Built in fan for active cooling, reserved air duct for forced air cooling
	Interface	Input LP20 aviation plug, output XT90, XT60 ×2
	Protection	IP54
	Size	468 × 308 × 142 ± 0.5mm, excluding handles and connectors
	Weight	9.8 ± 0.2kg (replace one 11.5kg drone battery)

 Our Advantages 
1. Rich working experience, fast service, and the most professional tether station solution provider. Our company has over 10 years of experience in the development and production of cable power system.
2. Strong product compatibility. Compatible with DJI drones and other brands of medium to large multi rotor drones.
3. Personalized customized services to meet the different needs of customers.
4. The most popular products. Compared to competitors, our products are smaller in size, lighter in weight, easier to operate, with automatic cable tension management, constant voltage output which can protect drone's original batteries.