| Customization: | Available |
|---|---|
| Ground Power Module Input Voltage: | 190-240VAC |
| Ground Power Module Output Voltage: | 600-810VDC |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Typical characteristics
1). Small size, light weight, easy to carry, and fast deployment.
2). Easy to operate, no need to operate tethering box during UAV flight.
3). Comprehensive protection function, fault elimination and self recovery.
4). Airborne power supply constant voltage output, the backup battery has no capacity and voltage loss.
| Support flight altitude | 100m/200m (tethered cable 110m/220m, reserved safety length) |
| Support takeoff weight | 20-30kg (drone power efficiency varies, this data is for reference only) |
| Support flight duration | ≥ 24h (the system can support working duration, which depends on the structure and electrical fatigue resistance of the drone) |
| Items | Technical parameters | ||
| Model | TPS110M-6KW Ver. 2.0 | TPS220M-6KW Ver. 2.0 | |
| Cable length | 110M | 220M | |
| Ambient temperature | -20~45 ºC (working), -40~65 ºC (storage) | ||
| Relative humidity | 10-80% RH (working), 5-90% RH (storage) | ||
| Altitude | ≤ 3000m | ||
| Ground power module | Input voltage | 190-240Vac wide range input, single-phase 220Vac@50/60Hz | |
| Output voltage | 600~810Vdc adjustable, factory default 750Vdc | ||
| Output power | 7000W (rated long-term output), 8000W (peak value ≤ 30s) | ||
| Storage cable length | Standard storage cable 110m; 220m are optional | ||
| Retraction speed | 0-2m/s, adjustable | ||
| Reel in/out tension | 0-15N, adjustable | ||
| Interface | Input aviation socket, fiber optic FC port (optional), communication Type-C port, cable output XT60 connector | ||
| Buttons and switches | High-voltage on/off button, cable forced retraction button, input AC switch, backup battery switch for reel in cable | ||
| Protection level | IPx4 | ||
| Size | 450 × 360 × 286 ± 0.5mm, excluding foot pads | ||
| Weight | 17.5± 0.5kg, not including tethered cable weight | ||
| Cable | Material | Silver plated lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer | |
| Fiber optic (optional) |
The tethered cable is an optoelectronic composite cable, which contains tightly packed single-mode fiber optic and can be optionally equipped with fiber optic communication | ||
| Current | 7-10A | ||
| DC resistance | 4.6 ± 0.1 Ω, 100m@20 ºC loop | ||
| Tensile strength | ≥ 150kg, resistant to repeated retraction and release ≥ 1000 times | ||
| Insulation strength | ≥ 3500Vdc, no breakdown for 1 minute | ||
| Cable length | Standard storage cable 110m; 220m are optional; Fiber optic with FC connector (optional). |
||
| Outer diameter | 3.5 ± 0.2mm | ||
| Weight | 2.1 ± 0.1kg/100m | ||
| Air module | Input voltage | 580~810Vdc wide range input | |
| Output voltage | 50 ± 0.5Vdc, constant voltage output, supporting voltage customization | ||
| Output power | 6000W (rated long-term output), 8000W (peak value ≤ 10s) | ||
| Protection function | Input overvoltage and undervoltage protection Output overvoltage, overcurrent, short circuit, and over temperature protection |
||
| Isolation voltage | 3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | ||
| Installation method | Reserve installation holes and fix them with screws. | ||
| Heat dissipation method | External fan active heat dissipation, reserved air duct forced air cooling | ||
| Interface | Input XT60, output XT90*3 | ||
| Protection level | IP54 | ||
| Size | 200 × 150× 68 ± 0.5mm, excluding mounting lugs | ||
| Weight | 2200 ± 50g, excluding external connectors | ||
| Packing | Size | 700×500×420±5mm (Wooden size) | |
| Weight | 35.0±0.5kg, including ground power module, air module, Annexes and documents | ||
Ground module Air module Cable
The tethered UAV can be applied in situations and environments that require long-time operation, making up for the shortcomings of short endurance time, faster power consumption with more mounts, and the need for frequent battery replacement. It expands the industry application of UAV.
1.More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual
2. The operator should receive professional training and examination, untrained personnel do not handle this product
3. Don't be drunk, poor state of fatigue, sick when handling this product
4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger
5. Please fly under the safe take-off weight, in case of any risks.
6. Please not fly under strong electromagnetism interference circumstance
7. Please follow the local laws and regulations and not fly in no-fly zone
8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers.
9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V
10. The battery long time no use, please store it in ventilated dry place with 60% electricity
){kind=link}