Dji Mavic 3 Tethered Power System for Monitoring

• Customization: Available
• Ground Module Input Voltage: 190V to 240V
• Ground Module Onput Voltage: 360~400V
• Model NO.: TPS55M-M3
• Ground Module Output Power: Greater Than or Equal to 800W
• Ground Module Protection Level: Ipx4
• Cable Length: 55m
• Weight: 4.6kg
• Air Module Iutput Voltage: 350~410V
• Air Module Output Voltage: 17.2V
• Air Module Output Power: Greater Than or Equal to 600W
• Air Module Protection Level: IP54
• Transport Package: Carton Box
• Specification: 500X400X300mm
• Trademark: Rosefinch
• Origin: China
• HS Code: 8479811000
• Production Capacity: 1000/Year

Product Description

DJI Mavic 3 Tethered Power System For Resuing Or High Altitude Relay Communication

I,Strengths

1.Small size,light weight and backpack storage.it is easy to carry.
2.The operation is simple,and the entire process of drone takeoffand landing does not require the operation of the ground module.
3.Comprehensive input/output protection, fault elimination and self-recovery.
4.The button type take-up function,power back-up take-up in case of power failure.
 

5.The air module power supply has a constant voltage output,and the back-up battery has no charging or discharging phenomenon throughout the entire process.


II,Adapted to DJI Mavic 3
1.Supporting flight duration:≥12h.
2.Supporting flight altitude:≥30m(Retention of safe length).
3.Optional lighting group:200w 



III,Functional characteristics
1.Protection functions:Separate design for strong and weak electricity.Input overvoltage and undervoltage protection.input undervoltage,input overvoltage,output overvotage,overcurrent,short circuit,over temperature protection,input and output voltage resistance≥3000VDC,tethered cable insulation voltage resistance≥3500VDC.
2.Automatic take-up and payoff: passive payoff, push-button automatic take-up, and manually press the button to reaction the cable while power cut off.
3.Carrying and transporting:Equipment portability,with a backpack design,it can be equipped with a complete set of tethered power system.
4.Power supply is optional 1800W/3500Wh,outdoor mobile power supply or 1200W/2.5L gasoline inverter generator (specification attached).
 

IV,Parameters

Items		Technical parameters
Model		TPS33M-M3	TPS55M-M3
Cable length		33M	55M
Ambient temperature		-20~45ºC(working),-40~65ºC(storage)
Relative humidity		10~80%RH(working),5~90%RH(storage)
Altitude		≤3000m
Ground power module	Input voltage	190~240Vac wide range input,single-phase 220Vac,frequency 50/60Hz
	Output voltage	360~400Vdc adjustable,factory default 400Vdc
	Output power	≥800W(rated long-term output),≥1000W(peak value≮30s)
	Interface	Input 3-pole socket,cable output XT60 connectors
	Button	High voltage button,take-up button
	Protection  level	IPx4
	size	D265×W150×H175±0.5mm,excluding foot pads and handles
	weight	4.3±0.2kgkg,including tethered cable
Tethered cable	material	Silver-plated lightweight high-temperature resistant aircraft wire, composite fluoroplastic insulation, high-modulus tensile aerospace-grade fiber braid.
	carrying capacity	1~1.5A
	Direct Current Resistance	38±0.5Ω,100m@20ºCloop
	Resistance tensile strength	≥50kg.Resistant to repeated reaction and release times≥500
	Insulation strength	≥3500Vdc.No breakdown for 1minute
	Cable length	55m
	External diameter	2.0±0.1mm
	weight	4.6±0.2g/m
Air module power supply	Input voltage	350~410Vdc.Wide range input
	Output voltage	17.2Vdc±1%.Constant voltage output,supporting voltage customization
	Output power	≥600W(rated long-term output),≥800W(peak value≮10s)
	Protection function	Input overvoltage,undervoltage protection,output overvoltage,overcurrent,short circuit,over temperature protection
	Isolation voltage	3000V(Vin-Vout),1min.Current leakage≤5mA,no breakdown ,flying arc and corona phenomenon
	Installation method	Installation: belly slider quick release, need to be pre-installed mounting bracket in the belly (does not affect the storage)
	Heat dissipation method	Passive heat dissipation,natural air cooling of heat dissipation teeth
	Interface	Input XT60,output XT30,Battery interface
	Protection level	IP54
	size	105×56×25±0.5mm.Mounting brackets and connectors not included
	weight	200±10g.External connection and cables not include
Packaging	Size	460×350×240±5mm(backpack size),500×400×300±5mm(carton size)
	weight	7.5±0.5kg.Including tethered box,onboard power supply,annexes and documents

1,Unless otherwise specified,the above data are all tested at Temp=25ºC,humidity<75%,nominal Input and rated Load.
2,Due to space limitations,there is incomplete data in the sheet.please contact our sales personnel to obtain it.

With its unique advantages and wide application prospects, tethered power drones are becoming a new trend in night lighting. We believe that with the continuous progress of technology and the continuous expansion of the market, tethered power drones will play a greater role in the future development and bring more convenience and surprise to our life.