| Customization: | Available |
|---|---|
| Ground Module Input Voltage: | 380V |
| Ground Module Onput Voltage: | 600~800V |
|
Still deciding? Get samples of US$ 41397/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Heavy-Duty Drone Tether System with Stable Power Feed
A tether power system, is an arrangement where an aircraft or unmanned aerial vehicle (UAV, commonly known as a drone) is physically connected via a cable, or tether, to a ground-based power source. This setup allows the airborne platform to receive continuous electrical power during flight, ensuring optimal performance without relying solely on onboard batteries or fuel cells.
II,Adapted drone
1.Supporting flight altitude:≥200/300m(tethered cable length220/330m,reserve safe length.).
2.Supporting takeoff weight:60~90kg(UAV force effect varies, this data is for reference only.).
3.Supporting flight duration:≥48h(he system can support working hours depending on the structure of the UAV and the electrical fatigue resistance).
| items | Technical parameters | ||
| model | TPS220M-L400-18K | TPS330M-L400-18K | |
| Cable length | 220M | 330M | |
| Environmental temperature | -20~45ºC(working),-40~65ºC(storage) | ||
| Relative humidity | 10~80%RH(working),5~90%RH(storage) | ||
| Altitude | ≤3000m | ||
| Ground power module | Input voltage | 380±10%VAC,three-phase, five-wire system (TCM),frequency50Hz | |
| Output voltage | 600~800Vdc adjustable,Factory Default 800Vdc | ||
| Output power | ≥22000W(Rated Long-Time Output),≥25000W(peak value≮30s) | ||
| take-up and payoff speed | 0~3m/s,adjustable | ||
| take-up and payoff tensile | 0~20N,adjustable | ||
| interface | Input air plug, bollard output LP20 air plug, fiber optic FC port (optional) | ||
| Button and switch | AC Switches, high voltage on/off buttons, cable take-up buttons, power backup switches | ||
| Protection level | IPx4 | ||
| Size | 600×570×460±0.5mm,excluding foot pads and external accessories | ||
| Weight | 54±0.5kg,excluding tethered cable | ||
| Tethered cable | Material | Alloy lightweight high temperature resistant aircraft wire, composite fluoroplastic insulation, high modulus tensile aerospace grade fiber braid | |
| Fiber optic communication | The tethered cable is an optoelectronic composite cable containing tightly wrapped single-mode fiber with optional fiber optic communication. | ||
| Current | 25~30A | ||
| DC resistance | 1.6±0.1Ω,100m@20ºCloop | ||
| Resistance Tensile strength | ≥300kg,resistant to repeated reaction and release times≥1000 | ||
| Insulation strength | ≥3500Vdc,1min no breakdown | ||
| Cable length | standard equipment 220m,optional 330m | ||
| Outer diameter | 6.3±0.1mm | ||
| Weight | 44±1g/m | ||
| Air module | Input voltage | 580~810Vdc wide range input | |
| Output voltage | 50Vdc±1% or 58Vdc±1%,constant voltage output,support voltage customization | ||
| Output power | ≥18000W(rated long-term output),≥22000W(peak value≮10s) | ||
| Protection function | Input over voltage,under voltage protection,output over voltage,over current,short circuit,and over temperature protection | ||
| Communication function | Optional CAN communication to report voltage, current, temperature data and operating status information. | ||
| Isolation voltage | ≥3000V(Vin-Vout),1min,Current leakage 5mA,no breakdown,flying arc and corona phenomena | ||
| Installation method | Pre-mounted lugs, screwed in | ||
| Heat dissipation | Built-in fan for active cooling, reserved air ducts for forced air cooling | ||
| Interface | Input LP20 Air Plug,output EC8×4 | ||
| Protection level | IP54 | ||
| Size | 400×304×69±0.5mm,excluding connector | ||
| Weight | 8.0±0.2kg,excluding outer connector and wire | ||
| Packages | Size | wheeled suitcase:850×740×600±5mm(Wheels not included) | |
| Weight | 110±5kg,Storage of ground power module, air module, trailer (optional), Annexes and documents | ||
){kind=link}