Beginner Friendly and Conveyable Drone Tether Power System for Flycart30

• Customization: Available
• Ground Module Input Voltage: 190V to 240V
• Ground Module Onput Voltage: 600~800V
• Model NO.: TPS330M-FC30
• Ground Module Protection Level: Ipx4
• Cable Length: 330m
• Weight: 8.5kg
• Air Module Iutput Voltage: 580~810V
• Air Module Output Voltage: 51.5V
• Air Module Output Power: Greater Than or Equal to 3000W
• Air Module Protection Level: IP54
• Transport Package: Carton Box
• Specification: 550*420*260mm
• Trademark: Rosefinch
• Origin: China
• HS Code: 8479811000
• Production Capacity: 1000/Year

Product Description

Beginner-Friendly And Conveyable Drone Tether Power System For Flycart30

I,Typical Characteristic
1.Simple operations,the entire process of drone taking off and landing does not require the operation of ground module.
2.Comprehensive input /output protection,fault elimination and self recover.
3.Fully automatic take up and pay off function,the wire can be rewound under power loss.
4.The air module power supply has a constant voltage output,and the back up battery has no charging and discharging phenomenon.
5.The air module power supply replaces a single drone battery without any structural changes to the drone.

II,Adapted FC30 drone
1.Supporting flight duration:≥24h.
2.Supporting flight altitude:≥200/300m(tethered cable length220/330m,Reserve safe length)

III,Function characteristics
1.Protection functions:Separate design for strong and weak electricity.input over voltage and under voltage protection,output over voltage ,output over current,output circuit,output over temperature protection,input and output voltage resistance≥3000VDC,tethered cable insulation voltage resistance≥3500VDC.
2.Data communication:wired and wireless communication function,Support remote display and control,client-side data viewing and downloading.Optional fiber optic communication.
3.Data display function:The touch screen displays data such as output voltage,output current,output power, cable outlet length,working duration,installation temperature,total power consumption,fault record,and working status information.
4.Set and adjustment:the display screen supports setting and adjustment the parameters such as take-up and payoff tensile and speed,data and time,output voltage,safety lengths,warning temperature,ect...,and support the switching between Chinese and English.
5.Alerts and reminds:Failure the screen displays the contents of the fault,the buzzer strong sound reminder.
6.Automatic take-up and payoff:following take off and landing of the drone to synchronously tethered cable take-up and payoff,adjusting the tension auto management,and manually press the button to reaction the cable while power cut off.
7.Carry and transport:The box is equipped with a handle and foot pads, optional folding trailer, trolley wheels for transportation. Power supply is optional 25000W/100L diesel generators (specifications attached)
IV,Parameters

items		Technical parameters
Model		TPS220M-FC30	TPS330M-FC30
Cable length		220M	330M
Environmental temperature		-20~45ºC(working),-40~65ºC(storage)
Relative humidity		10~80%RH(working),5~90%RH(storage)
Altitude		≤3000m
Ground power module	Input voltage	380±10%VAC,three-phase, five-wire system (TCM),frequency 50Hz
	Output voltage	600~800Vdcadjustable,Factory Default 800Vdc
	Output power	≥22000W(Rated Long-Time Output),≥25000W(peak value≮30s)
	take-up and payoff speed	0~3m/s,adjustable
	take-up and payoff tensile	0~20N,adjustable
	interface	Input air plug, bollard output LP20 air plug, fiber optic FC port (optional)
	Button and switch	AC Switches, high voltage on/off buttons, cable take-up buttons, power backup switches
	Protection level	IPx4
	Size	600×570×460±0.5mm,excluding foot pads and external accessories
	Weight	54±0.5kg,excluding tethered cable
Tethered cable	Material	Alloy lightweight high temperature resistant aircraft wire, composite fluoroplastic insulation, high modulus tensile aerospace grade fiber braid
	Fiber optic communication	The tethered cable is an optoelectronic composite cable containing tightly wrapped single-mode fiber with optional fiber optic communication.
	Current	25~30A
	DC resistance	1.6±0.1Ω,100m@20ºCloop
	Resistance Tensile strength	≥300kg,resistant to repeated reaction and release times≥1000
	Insulation strength	≥3500Vdc,1min no breakdown
	Cable length	standard equipment 220m,optional 330m
	Outer diameter	6.3±0.1mm
	Weight	44±1g/m
Air module	Input voltage	580~810Vdc wide range input
	Output voltage	59Vdc±1%,constant voltage output,support voltage customization
	Output power	≥18000W(rated long-term output),≥22000W(peak value≮10s)
	Protection function	Input over voltage,under voltage protection,output over voltage,over current,short circuit,and over temperature protection
	Communication function	Optional CAN communication to report voltage, current, temperature data and operating status information.
	Isolation voltage	≥3000V(Vin-Vout),1min,Current leakage 5mA,no breakdown,flying arc and corona phenomena
	Installation method	Replacement of one drone battery, direct plug-and-play installation
	Heat dissipation	Built-in fan for active cooling, reserved air ducts for forced air cooling
	Interface	Input LP20 air plug,output XT90,XT60×2
	Protection level	IP54
	Size	468×308×142±0.5mm,excluding connector
	Weight	10.8±0.2kg(Replacement of one 11.5kg drone battery)
Packages	Size	wheeled suitcase:850×740×600±5mm(Wheels not included)
	Weight	115±5kg,Storage of ground power module, air module, trailer (optional), Annexes and documents

1,Unless otherwise specified,All of the above data are in Ta=25ºC,humidity<75%,nominal Input and rated Load.
2,Due to space limitations,there is incomplete data in the sheet.please contact our sales personnel to obtain it.

Certification

Company Profile

For drone tethered power system,you can choose several types from below form:

1. DJI Mavic 3 Tethered Power System
2. DJI M30 Tethered Power System
3. DJI M350 Tethered Power System V2
4. DJI M350 Tethered Power System V1
5. DJI Flycart30 Tether power system
6. 600W Universal Tethered Power System
7. 2000W Universal Tethered Power System
8. 3000W Universal Tethered Power System V3
9. 3000W Universal Tethered Power Station V2
10. 3000W Universal Tethering Power Station V1
11. 6000W Universal Tethered Power System
12. 12000W Universal Tethered Power Supply System
13. 18000W Universal Tethered Power Supply System

Main Applications of Drone Tethered Power System

-Day and night missions
-Radio relay
-Crisis management
-Site protection
-Traffic surveillance
-Large-scale events security
-Forest surveillance
-Industry monitoring
-Air-quality monitoring


Important safety notice of Drone Tethered Power System
 

1. More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual
2. The operator should receive professional training and examination, untrained personnel do not handle this product
3. Don't be drunk, poor state of fatigue, sick when handling this product
4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger
5. Please fly under the safe take-off weight, in case of any risks.
6. Please not fly under strong electromagnetism interference circumstance
7. Please follow the local laws and regulations and not fly in no-fly zone
8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers.
9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V
10. The battery long time no use, please store it in ventilated dry place with 60% electricity

Our service
Our Main Solutions
1. Mapping, surveying and 3D modeling
2. Surveillance
3. Inspection
4. Delivery
5. Customization according to application and client's requirements
 

FAQ

Q1: Do you support OEM/ODM? 
A1: Yes. We can print your logo on the product.
 Q2: About samples. 
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
 Q3: What is the delivery time? 
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity? 
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost? 
A5: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.


If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.