| Customization: | Available |
|---|---|
| Ground Power Module Input Voltage: | 190-240VAC |
| Ground Power Module Output Voltage: | 360-400VDC |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Typical characteristics
2.Adaptive drone
| Items | Technical parameters | ||
| Model | TPS33M-600W | TPS55M-600W | |
| Cable length | 33M | 55M | |
| Ambient temperature | -20~45 ºC (working), -40~65 ºC (storage) | ||
| Relative humidity | 10-80% RH (working), 5-90% RH (storage) | ||
| Altitude | ≤ 3000m | ||
| Ground power module | Input voltage | 190-240Vac wide range input, single-phase 220Vac, frequency 50/60Hz | |
| Output voltage | 360~400Vdc adjustable, factory default 400Vdc | ||
| Output power | 800W (rated long-term output), 1000W (peak value ≥ 30s) | ||
| Storage cable length | Standard storage cable 33m; 55m is optional | ||
| Interface | AC Input socket, cable output XT60 | ||
| Button | High voltage button, take-up button | ||
| Protection level | IPx4 | ||
| Size | D265 *W150*H175 ± 0.5mm, excluding foot pads and handles | ||
| Weight | 4.3 ± 0.2kg, not including tethered cable | ||
| Cable | Material quality | Silver plated lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer | |
| Carrying capacity | 1.0-1.5A | ||
| DC resistance | 38 ± 0.2 Ω, 100m@20 ºC loop | ||
| Tensile strength | ≥ 50kg, resistant to repeated retraction and release ≥ 500 times | ||
| Insulation strength | ≥ 3500Vdc, no breakdown for 1 minute | ||
| Cable length | Standard 33 ± 2m; 55 meter is optional | ||
| External diameter | 2.2 ± 0.1mm | 2.0 ± 0.1mm | |
| Weight | 6.5 g/meter | 4.6 g/meter | |
| Air module | Input voltage | 330-430Vdc wide range input | |
| Output voltage | 16.5±0.2Vdc or 25±0.3Vdc, constant voltage output, supporting voltage customization | ||
| Output power | 600W (rated long-term output), 800W (peak value ≥ 10s) | ||
| Protection Function | Input overvoltage and undervoltage protection. Output overvoltage, overcurrent, short circuit, and over temperature protection |
||
| Isolation voltage | 3000V (Vin Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | ||
| Installation method | Reserved installation ears, fixed with screws | ||
| Heat dissipation method | Passive heat dissipation, natural air cooling of heat dissipation teeth | ||
| Interface | Input XT60, output XT30*2 | ||
| Protection level | IP54 | ||
| Size | 105*56*32±0.5mm, Excluding installation ears | ||
| Weight | 220 ± 10g, without external connectors | ||
| Packing | Size | 460×350×240±5mm (Backpack size) 500×400×300±5mm (Carton size) |
|
| Gross Weight | 7.5±0.5kg,including tethered box,onboard power supply, annexes and documents | ||
The products are used and deployed by armed forces, law enforcement, civil security, and private security in over 20 countries for event protection, perimeter surveillance, border protection, radio communications, long-duration health monitoring, emergency communication, traffic management, environment inspections, scientific research and many more.
| 1.More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual 2. The operator should receive professional training and examination, untrained personnel do not handle this product 3. Don't be drunk, poor state of fatigue, sick when handling this product 4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger 5. Please fly under the safe take-off weight, in case of any risks. 6. Please not fly under strong electromagnetism interference circumstance 7. Please follow the local laws and regulations and not fly in no-fly zone 8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers. 9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V 10. The battery long time no use, please store it in ventilated dry place with 60% electricity |
){kind=link}