Continuous Power Supply Cable Auto Reel Tether Power System
The main function of this product is to provide safe and reliable long-endurance flight power for DJI M300 UAV up to 24 hours.
This product can be used as a tool to enable users to concentrate on flight operations without additional operations during the whole takeoff and landing flight operations.
Main features
1) It has greatly extended the operation time of UAV, and supports continuous operation for 24 hours and uninterrupted immediate secondary operation;
2) It is small in size and light in weight. It can be carried by pull rod or hand. It can be used to tie down the folding cover of the box;
3) Automatic retraction and pay-off, the whole process of UAV takeoff and landing flight does not need to operate the tether box, just concentrate on the flight operation;
4) 640W or 1280W high-power and high-intensity lighting unit can be optional, and the effective lighting area can reach more than 10000 m2;
5) Comprehensive input and output protection function, operation, fault record and data storage, support wired communication and mobile phone synchronization;
6) The two modes of tether and release can be switched freely and quickly, which greatly expands the application scenarios and functions of the DJI M300 UAV.
Tether cable
| Material |
multi-strand silver-plated copper wire, composite fluoroplastic insulation layer, high-temperature resistant copolymer sheath, high modulus tensile aviation grade fiber braid |
| Working current |
3~5A |
| DC resistance |
10.6 ± 0.2 Ω, 100m loop @ 20 ºC |
| Tensile strength |
≥ 100kg, resistance to repeated retraction and release ≥ 1000 times |
| Insulation strength |
≥ 3000Vdc, no breakdown for 1min |
| Mooring length |
110 ± 2m (support customized line length) |
| Outer diameter |
2.6 ± 0.2mm |
| Weight |
11.5 ± 0.5g/m |
Air module power supply
| Input voltage |
580~750Vdc wide range input, constant voltage output |
| Output voltage |
25±0.3Vdc or 50 ± 0.5Vdc, supporting output voltage customization |
| Output power |
3000W (rated long-term output), 3500W (peak value ≤ 30s) |
| Installation method |
reserved installation lug and fixed with screws |
| Heat dissipation mode |
built-in fan active heat dissipation, reserved air duct forced air cooling |
| Interface |
input XT60, output XT90, support interface customization |
| Size |
158 × 134× 50 ± 0.5mm (excluding mounting lug and interface) |
| Weight |
1.1 ± 0.5kg |
Ground module
| Input voltage |
176~300Vac @ full load output, 85~176Vac @ half load output, 50/60Hz |
| Output voltage |
400~750Vdc adjustable, factory default 750Vdc |
| Output power |
4000W |
| Data display |
4.3 inch touch screen displays current, voltage, temperature, line length, operation record, fault record and other data |
| Alarm function |
in case of system fault, the display screen will scroll to display fault information, and the fault warning light will flash red and beep |
| Communication function |
Modbus tcp communication (standard product has no open interface), supporting wired communication and mobile phone synchronous display |
| Retraction speed |
0~2m/s, 10 gears adjustable |
| Retrieving and releasing tension |
the reel in and out tension is divided into 10 gears, which can be adjusted |
| Working mode |
passive reel out, active reel in, automatic wire arrangement, and button forced reel in
the rest length |
| Carrying transportation |
support the carrying mode of carrying and carrying by hand, with optional pull
rod and roller components |
| Interface |
input pin socket with switch |
| Buttons and switches |
high-voltage output button, cable reel in forced button, AC input switch, alarm lamp |
| Size |
450 × 350 × 210 ± 0.5mm (excluding knapsack components and external connectors) |
| Weight |
13.5 ± 0.3kg (including tethered cable, excluding external accessories) |
Protection function
A. Input over-voltage and under-voltage protection: turn-off protection, fault elimination and self-recovery;
B. Output overcurrent protection: constant current step-down protection, fault elimination and self-recovery;
C. Output short circuit protection: output current limiting operation, fault elimination and self-recovery;
D. Output over-temperature protection: the shell temperature is 95 ± 2.5 ºC, and the cooling is self-recovery;
E. Output overvoltage protection: automatically shut down and lock, restart and power on for recovery.
Audited Supplier 
){kind=link}
){kind=link}